All Category

Power Supply

View : Grid List
Filter

34 Item(s)

Set Ascending Direction
  1. Power transformer MT58
    PROXXON Power transformer MT58
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$53.99
    Min. 2 days
  2. DC power pack (2-station type)
    Minitor DC power pack (2-station type)
    A high-performance power pack equipped with new functions that maximize the capabilities of the handpiece. In Ver.2 handpiece, the type is identified just by inserting the handpiece, and in addition to speed display, optimum torque control is performed.
    Outlet  [Tool] 2 places  Output Voltage (V)  DC1~30  Trusco Part No.  491-7111  Input Voltage (V)  AC100  Rated Input (VA)  60  Mass (kg)  2.5  Power Cable (m) 
    from S$859.90
    Min. 2 days
  3. CL / SS / a driver dedicated power supply
    HIOS CL / SS / a driver dedicated power supply
    This is a dedicated power supply for CL / SS / a series drivers. (CLT-45 cannot be CL-7000, 9000, SS-7000, α-6500)
    Trusco Part No.  781-0598  Mass (g)  330  Width (mm)  71.5  Input power (V)  AC100~240  Power Consumption (W)  48  Height (mm)  42.6  Power Cable (m)  1.8 (Inlet cord with ground)  Length (mm)  146  Secondary Output  Hi / Lo two-stage switching 
    from S$179.90
    Min. 2 days
  4. Brushed Electric Screwdriver
    HIOS Brushed Electric Screwdriver
    Multi-input type (supports up to AC100-240V). It supports a wide range of input voltages and can provide a stable power supply. Its compact size allows it to be installed anywhere. * Cannot be combined with CL-9000.
    Power Cable (m)  1.8 (Inlet cord with ground)  Trusco Part No.  344-4490  Mass (g)  830  Outer Dimensions, Width W x Depth D x Height H (mm)  88×210×52  Primary Side Input Voltage  AC100V~AC240±5%(47/63Hz)  Secondary Output  HI / LOW two-stage switching  Specification  Multi-input type 
    from S$299.90
    Min. 2 days
  5. Power supply for brushless screwdriver
    HIOS Power supply for brushless screwdriver
    Brushless driver BL, BLG series dedicated power supply. (BL-7000 is not possible) Secondary output: Hi / Lo 2-step switching (some drivers cannot be switched)
    Height (mm)  42.6  Trusco Part No.  781-3163  Power Consumption (W)  40  Width (mm)  71.5  Cable Length (m)  1.8 (Inlet cord with ground)  Mass (g)  320  Length (mm)  146  Recharging Input Voltage (V)  AC100~240 
    from S$169.90
    Min. 2 days
  6. Power supply for electric screwdriver (one power supply)
    HIOS Power supply for electric screwdriver (one power supply)
    Brushless screwdriver (BL series) 1 unit power supply.
    Input Power  AC100~240V  Secondary Output  Hi / Lo two-stage switching  Cable Length (m)  1.8 (Inlet code) 
    from S$259.90
    Min. 2 days
  7. Mini Eight Power Unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini Eight Power Unit
    A compact, lightweight, high-performance, high-end power unit developed in anticipation of the future. Compact size with an emphasis on beautiful design and functionality. Equipped with a high-performance microcomputer Equipped with 2-station feedback function With soft start and quick stop funct... Read More
    Fuse Capacity (A)  Rated input  AC100V 50/60Hz 30W 
    from S$749.90
    Min. 2 days
  8. Power unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Power unit
    Forward rotation and reverse rotation are possible. Built-in circuit breaker to protect the motor from burning. A foot switch (optional) can be used.
    Fuse Capacity (A)  Rated Input (VA)  30  Power Supply  AC100V 50/60Hz 
    from S$379.90
    Min. 4 days
  9. High frequency inverter power supply
    Nidec Techno Motor High frequency inverter power supply
    Low noise and low vibration. It consumes less power and is economical. Equipped with various protection functions, it is a safe inverter power supply. Due to the dustproof structure, it is trouble-free.
    Cable Length (m)  input side voltage  3-phase AC 200-240V  Output Voltage (V)  3-phase AC 200-240V  Output Frequency (Hz)  400Hz  Mass (kg)  6.5  Specification  Power ON / OFF switch  inverter method  Sine wave approximation PWM method  Cooling Method  cooling fan  Allowable Voltage Fluctuation  ± 10% or less 
    from S$1,699.00
    Min. 2 days
  10. GOLD2 power unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) GOLD2 power unit
    With a carrying handle that is convenient to carry. Forward / reverse rotation is possible. A foot switch (optional) can be used.
    Rated Input (VA)  35  Fuse Capacity (A)  1.5  Power Supply  AC100V 50/60Hz 
    from S$389.90
    Min. 4 days
  11. High frequency inverter power supply
    Nidec Techno Motor High frequency inverter power supply
    It is now possible to use two grinders at the same time with one inverter. Comes with a soft start function. With an instant stop (brake) function.
    Mass (kg)  12  Output Voltage (V)  3-phase AC 200-240V  input side voltage  3-phase AC 200-240V  Output Frequency (Hz)  400Hz  Dimensions, Width W x Depth D x Height H (mm)  400×180×222  Input Frequency (Hz)  50Hz 60Hz  Type of Control  Sine wave PWM method  inverter method  Sine wave approximation PWM method  Cooling Method  cooling fan  Allowable Voltage Fluctuation  ± 10% or less 
    from S$2,999.00
    Min. 32 days
  12. High Frequency Inverter Power Supply (250Hz)
    FUJI GRINDING WHEEL MFG High Frequency Inverter Power Supply (250Hz)
    It is resistant to overload due to the increased inverter rating. Visibility has been improved with an illuminated switch. Dustproofness has been improved by the dustproof filter device. (Filter replaceable) Two of our high frequency grinders can be used at the same time. Protect the outlet with ... Read More
    Power Supply Capacity (kVA)  (Input side) 17.0  Output Capacity (kVA)  (Output side) 13.1  Mass (kg)  14.5  output side voltage  200V (corresponds to input voltage)  Trusco Part No.  207-1527  Output Frequency (Hz)  250  Rated Current (A)  33.0  Input Frequency (Hz)  50/60  input side voltage  Three-phase 200V 
    from S$5,899.00
    Min. 32 days
  13. Adapter for VSC-02
    VESSEL Adapter for VSC-02
    For screw counter No. VSC-02 [Image notes] * For VSC-02.
    Input / Output  AC100-240V/DC24V  Suitable for  VSC-02  Main Unit Dimensions, Length (mm)  70 
    from S$67.99
    Min. 6 days
  14. 400Hz high frequency inverter power supply
    Nidec Techno Motor 400Hz high frequency inverter power supply
    Low noise and low vibration --- Extremely low noise and low vibration due to the static power supply. Economical-Economical with low power consumption. Dust-proof structure-The inverter is closed as a measure against dust caused by grinding work. Stable output voltage-The output voltage is detect... Read More
    output side voltage  3-phase AC + 200-240V  input side voltage  3-phase AC + 200-240V  Mass (kg)  6.0  Protection  Indoor closed type  Frequency (Hz)  Input side: 50/60, output side: 400  Allowable Voltage Fluctuation  Input side: ± 10% or less  Frequency Tolerance  Input side: ± 5% or less  inverter method  Sine wave approximation PWM method  Cooling Method  cooling fan 
    from S$1,499.00
    Min. 5 days
  15. High Frequency Inverter Power Supply (120-250Hz)
    FUJI GRINDING WHEEL MFG High Frequency Inverter Power Supply (120-250Hz)
    It is resistant to overload due to the increased inverter rating. Visibility has been improved with an illuminated switch. Dustproofness has been improved by the dustproof filter device. (Filter replaceable) This type is exclusively for one of our high frequency grinders.
    Power Supply Capacity (kVA)  (Input side) 9.0  Output Capacity (kVA)  (Output side) 7.0  Output Frequency (Hz)  120~250  Rated Current (A)  17.5  output side voltage  200V (corresponds to input voltage)  Trusco Part No.  207-1528  Input Frequency (Hz)  50/60  Mass (kg)  input side voltage  Three-phase 200V 
    from S$2,299.00
    Min. 32 days
  16. Mini light power unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini light power unit
    Rated Input (W)  10  Mass (g)  850  Dimensions, Width W x Length L x Height H (mm)  85×125×70  Power Input (V)  AC100(50/60Hz) 
    from S$199.90
    Min. 4 days
  17. 250Hz high frequency inverter power supply
    Nidec Techno Motor 250Hz high frequency inverter power supply
    Low noise and low vibration --- Extremely low noise and low vibration due to the static power supply. Economical-Economical with low power consumption. Dust-proof structure-The inverter is closed as a measure against dust caused by grinding work. Stable output voltage-The output voltage is detect... Read More
    output side voltage  3-phase AC + 200-240V  input side voltage  3-phase AC + 200-240V  Mass (kg)  5.5  Protection  Indoor closed type  Power Supply Capacity (kVA)  Input side: 5.5 (20A)  Frequency (Hz)  Input side: 50/60, output side: 250  Allowable Voltage Fluctuation  Input side: ± 10% or less  Frequency Tolerance  Input side: ± 5% or less  Output Capacity (kVA)  Output side: 4.2  inverter method  Sine wave approximation PWM method  Cooling Method  cooling fan 
    from S$2,299.00
    Min. 5 days
  18. 400Hz high frequency inverter power supply
    FUJI GRINDING WHEEL MFG 400Hz high frequency inverter power supply
    Powered up compared to conventional products. Low noise and low vibration. It consumes less power and is economical. Dust prevention has been improved by installing a filter at the intake port. Various protection functions are enhanced by overcurrent detection. Detects overload. Detects power sho... Read More
    Width (mm)  215  Power Supply Capacity (kVA)  (Maximum) 4.2 or more  Allowable Voltage Fluctuation  [Input] 180-250V  Height (mm)  255  Output Capacity (kVA)  (Maximum) 4.2 or more  Current (A)  11  Output Frequency (Hz)  400  Trusco Part No.  855-2658  Input Frequency (Hz)  50~60  Mass (kg)  8.5  Length (mm)  233  Power Cable (m)  3 (without plug)  Motor Capacity (kW)  2.2  Type of Control  Sine wave PWM method 
    from S$2,399.00
    Min. 32 days
  19. DC power pack
    Minitor DC power pack
    Discontinued
  20. Power supply for CL-2000 charging driver
    HIOS Power supply for CL-2000 charging driver
    Dedicated power supply for electric screwdriver CL-2000. Supports a wide input voltage range. INPUT: 100V-240V It can be used with confidence even in an environment with severe voltage fluctuations.
    Power Capacity (W)  30  Included Accessories  Inlet cord with ground 1.8m (2P) x 1  Dimensions, Width W x Depth D x Height H (mm)  95×160×52  Secondary Output  HI / LOW two-step switching Max: 1A  Mass (kg)  About 0.71  Plug  A-1  Trusco Part No.  344-4481 
    Discontinued
  21. Power transformer MT50
    PROXXON Power transformer MT50
    Transformer  (Power supply) AC100V → DC12V 1.0A 
    Discontinued
  22. Micro grinder + leutor gold 2
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Micro grinder + leutor gold 2
    It is a power unit
    Trusco Part No.  115-0650 
    Discontinued
  23. Power supply for DC driver
    HIOS Power supply for DC driver
    Power Consumption (W)  84  Input Power  AC100V  Secondary Output  Hi / Lo 2-step switching Max.3.5A  Dimensions, Width W x Depth D x Height H (mm)  182×145×132  Trusco Part No.  290-1528  Power Cable  1.8m (AC / grounded inlet cord)  Mass (kg) 
    Discontinued
  24. LHB-12 power unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) LHB-12 power unit
    Full charge time: Approximately 2.5 to 3 hours Usage time: Approximately 2 hours (when fully charged, no load) It can be used while charging.
    Output Voltage (V)  DC0~12  Recharging Time (hours)  About 2.5-3  Fuse Capacity (A)  Battery Capacity (Ah)  1.8  Input Voltage (V)  DC18 
    Discontinued
  25. High frequency inverter power supply
    FUJI GRINDING WHEEL MFG High frequency inverter power supply
    Low noise and low vibration. It consumes less power and is economical. Equipped with various protection functions such as overcurrent / overvoltage / instantaneous power failure detection trip and electronic thermal relay trip, you can use it with confidence. The frequency is shared by 50Hz / 60Hz.
    Input Frequency (Hz)  50、60  Mass (kg)  18.5  Output Frequency (Hz)  250  Output Voltage (V)  Three-phase AC 200  Input Voltage (V)  Three-phase AC 200  Trusco Part No.  408-4705  Capacity (kVA)  (Inverter) Maximum 9 
    Discontinued
  26. Power supply for CL-4000 charging driver
    HIOS Power supply for CL-4000 charging driver
    Dedicated power supply for electric screwdriver CL-4000.
    Secondary Output  2.5A  Dimensions (mm)  105×185×91  Mass (kg)  2.7  Cable Length (m)  1.8 (Inlet type with ground)  primary input power supply  AC100V 50/60Hz 
    Discontinued
  27. Power cord pack
    Panasonic Power cord pack
    Battery Voltage (V)  12  Power Input (V)  100  Mass (kg)  0.20 (excluding the weight of the cord)  Cable Length (m)  10 
    Rating:
    87%
    Discontinued
  28. Dedicated power supply
    HIOS Dedicated power supply
    A dedicated power supply is required to drive the HIOS power supply driver (DC driver). The dedicated power supply takes the current (primary side) directly from the AC outlet, converts it to a low voltage (approximately HI: approx. 30V, LOW: approx. 20V), and supplies it to the DC driver. Safe a... Read More
    Included Accessories  Inlet cord with grounding 1.8m x 1  Power Capacity (W)  48  Mass (kg)  About 2.7  Dimensions, Width W x Depth D x Height H (mm)  105×185×91  Plug  A-1  Primary Side Input Voltage  AC100V±5%(50/60Hz)  Secondary Output  HI / LOW 2-step switching Max. 2.5A 
    Discontinued
  29. 400Hz high frequency inverter power supply
    Nidec Shibaura 400Hz high frequency inverter power supply
    -Since it does not have a commutator, there is no need to replace the brush, and it is the most suitable power tool for grinding work in terms of durability and maintenance. -Suitable for heavy grinding work with a maximum output of more than a pneumatic grinder. -Since the rotation speed does no... Read More
    Height (mm)  163  Mass (kg)  6.0  input side voltage  3-phase 200V-220V 50 / 60Hz  output side voltage  400Hz/3.2kVA  Length (mm)  245  Width (mm)  210 
    Discontinued
  30. DC power pack
    Minitor DC power pack
    Output Voltage (V)  DC3~30  Included Accessories  Rubber Cradle (RM11) x 1  Input Voltage (V)  AC100±5%(50/60Hz)  Dimensions, Width W x Depth D x Height H (mm)  144×218×116  Rated Input (VA)  60 
    Discontinued
  31. High frequency inverter power supply
    Nidec Techno Motor High frequency inverter power supply
    Low noise and low vibration. It consumes less power and is economical. Equipped with various protection functions, it is a safe inverter power supply by any chance. Due to the dustproof structure, it is trouble-free.
    Cable Length (m) 
    Discontinued
  32. Power supply for electric screwdriver
    HIOS Power supply for electric screwdriver
    Input power (V)  AC100~240  Width (mm)  88  Trusco Part No.  344-4490  Length (mm)  210  Height (mm)  52  Mass (g)  715  Power Consumption (W)  48 
    Discontinued
  33. DC driver dedicated power supply
    HIOS DC driver dedicated power supply
    A dedicated power supply is required to drive the HIOS power supply driver (DC driver). The dedicated power supply takes the current (primary side) directly from the AC outlet, converts it to a low voltage (approximately HI: approx. 30V, LOW: approx. 20V), and supplies it to the DC driver. Safe a... Read More
    Mass (kg)  About 4  Primary Side Input Voltage  AC100V±5%(50/60Hz)  Dimensions, Width W x Depth D x Height H (mm)  182×140×132  Included Accessories  Inlet cord with grounding 1.8m x 1  Power Capacity (W)  68  Secondary Output  HI / LOW 2-step switching Max: 3.5A  Specification  Built-in control function  Plug  A-1 
    Discontinued
  34. Polyter power pack
    Minitor Polyter power pack
    When too much current flows through the DC motor handpiece, a beep sounds to alert you before the overload function is activated. (Volume can be adjusted) The buzzer of the power pack makes it possible to clearly recognize the start / stop. This is especially effective for polyter handpieces wher... Read More
    Output Voltage (V)  DC3~30・AC MAX80(25±5kHz)  Dimensions, Width W x Depth D x Height H (mm)  144×218×116  Input Voltage (V)  AC100±5%(50/60Hz) 
    Discontinued
View : Grid List
Filter

34 Item(s)

Set Ascending Direction