Website Maintenance Announcement

How to Use
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Flexible Shafts

A flexible shaft is an auxiliary accessory that is mounted between the main body and the tip of a power tool such as a drill to reduce the work load. Applicable hole diameters include Φ3mm and Φ6mm. It is mainly used in processing sites that require drilling, but it can also be used for hobbies at home. Since the heavy drill body is fixed in a place away from your hand and you can handle the tip while holding the cord, there is an advantage that you can work in small or narrow places.
View : Grid List
Filter

Items 1 - 40 of 45

Page
Set Ascending Direction
  1. Consumer Edition Flexible Shaft
    Sumflex Consumer Edition Flexible Shaft
    Mass (g)  900  Allowable Rotation Speed (min -1 [rpm])  1200～3600 
    Rating:
    90%
    (8)
    from S$59.99
    Min. 2 days
  2. Flexible shaft
    PROZONE Flexible shaft
    Attached to an electric drill or drilling machine for detailed work or work in narrow spaces. By attaching various tip parts, it can be used for carving, shaving, and polishing.
    Shank Diameter (Φmm)  (Input) 6  Proper rotation speed (min -1 )  1200～3600 
    Rating:
    90%
    (2)
    from S$44.99
    Min. 2 days
  3. Flexible shaft
    RELIEF Flexible shaft
    Rating:
    93%
    (3)
    from S$29.99
    Min. 2 days
  4. Flexible shaft
    Sumflex Flexible shaft
    It is a transmission tool. It frees you from the weight of power tools during tool-less details, detailed work, and long hours of work.
    Shank Diameter (Φmm)  6  Mass (g)  920  Allowable Rotation Speed (min -1 [rpm])  1200～3600 
    Rating:
    100%
    (1)
    from S$89.99
    Min. 2 days
  5. Motor coupling
    Sumflex Motor coupling
    This product is for attaching a flexible shaft to an idle motor.
    Material  Steel  Hole Diameter (Φmm)  10/6 
    Rating:
    80%
    (3)
    from S$11.99
    Min. 2 days
  6. Flexible shaft
    SUN UP Flexible shaft
    With a flexible angle of 180 ° for tightening and removing screws in hard-to-reach and hard-to-reach places, it can be used freely with a charging driver even in narrow places. * Tapered screwdriver bits cannot be installed. * Cannot be used for impact drivers and electric drills.
    Mass (g)  80 
    from S$9.89
    Min. 2 days
  7. Flexible shaft
    Sumflex Flexible shaft
    It is a transmission tool. It frees you from the weight of power tools during tool-less details, detailed work, and long hours of work.
    Shank Diameter (Φmm)  6  Mass (g)  350 
    Rating:
    73%
    (3)
    from S$38.99
    Min. 2 days
  8. High speed flexible shaft
    Sumflex High speed flexible shaft
    Increased efficiency with a 22mm diameter metal grip. Can be used with a disc grinder. Inner shaft can be attached. Twist resistant HAT outer For polishing / grinding * When using for a disc grinder, a separate connection coupling No. 6312 for type 4 disc is required.
    Suitable for  Φ3mm, Φ6mm collet  Shank Diameter (Φmm)  3、6  Mass (g)  1000  Allowable Rotation Speed (min -1 [rpm])  1200～10000 
    Rating:
    100%
    (3)
    from S$199.90
    Min. 2 days
  9. Flexible shaft
    PROXXON Flexible shaft
    Processing of narrow parts, parts away from the router body * Never use it with an electric drill made by another company.
    Suitable for  No.28400、28472、28473  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$119.90
    Min. 2 days
  10. Flexible shaft & drill clamp
    PROZONE Flexible shaft & drill clamp
    A drill clamp required for fixing an electric drill is set on the flexible shaft. Flexible shaft made in Japan.
    Shank Diameter (Φmm)  (Input) 6  Proper rotation speed (min -1 )  1200～3600 
    from S$56.99
    Min. 2 days
  11. Flexible stand
    PROXXON Flexible stand
    from S$22.99
    Min. 2 days
  12. Flexible power shaft Small integrated type
    SUNFLAG (SHINKI MFG) Flexible power shaft Small integrated type
    For detailed work such as hobbies. * When using for a long time, be sure to lubricate the metal part.
    Specification  Chuck tolerance / 1.8 to 4.0mm  Mass (g)  422  Allowable Torque (Nm)  2.1  Proper rotation speed (min -1 )  2000～3000rpm  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    20%
    (1)
    from S$37.99
    Min. 2 days
  13. Motor coupling 19x6
    Sumflex Motor coupling 19x6
    This is a dedicated part that connects the shaft of the motor and the flexible shaft. For effective use of idle motors and various motor tools.
    Included Accessories  Dedicated wrench  Allowable Rotation Speed (min -1 [rpm])  5000 
    from S$13.99
    Min. 2 days
  14. Motor coupling 16x6
    Sumflex Motor coupling 16x6
    This is a dedicated part that connects the shaft of the motor and the flexible shaft. For effective use of idle motors and various motor tools.
    Included Accessories  Dedicated wrench  Allowable Rotation Speed (min -1 [rpm])  5000 
    Rating:
    100%
    (2)
    from S$13.99
    Min. 7 days
  15. Collet chuck for multi-hobby grinder
    RELIEF Collet chuck for multi-hobby grinder
    Collet chuck for exclusive use of MHG-001
    from S$7.49
    Min. 4 days
  16. Flexible shaft for PMR-165
    PROMOTE Flexible shaft for PMR-165
    Suitable for  Multi router set PMR-165 
    from S$56.99
    Min. 2 days
  17. Motor coupling 16x10
    Sumflex Motor coupling 16x10
    This is a dedicated part that connects the shaft of the motor and the flexible shaft. For effective use of idle motors and various motor tools.
    Included Accessories  Dedicated wrench  Allowable Rotation Speed (min -1 [rpm])  5000 
    from S$17.99
    Min. 12 days
  18. Parts for Joy Robot No.H-025 / H-026
    Sumflex Parts for Joy Robot No.H-025 / H-026
    [Compatibility] Joy Robo H-025 type, H-026 type Replacement parts for Joy Robo H-025 and H-026
    Suitable for  Joy Robot H-025 type, H-026 type 
    Rating:
    100%
    (1)
    from S$11.99
    Min. 7 days
  19. Motor coupling 19x10
    Sumflex Motor coupling 19x10
    This is a dedicated part that connects the shaft of the motor and the flexible shaft. For effective use of idle motors and various motor tools.
    Included Accessories  Dedicated wrench  Allowable Rotation Speed (min -1 [rpm])  5000 
    from S$17.99
    Min. 8 days
  20. Flexible shaft for handmate
    Tokyo Automach Flexible shaft for handmate
    It is a flexible shaft for handmate HMA-100B / BE / E1.5m type.
    Suitable Model  HMA-100B、HMA-100BE 
    from S$139.90
    Min. 3 days
  21. Flexible shaft with motor
    Sumflex Flexible shaft with motor
    Flexible shaft and motor box set Motor box with flexible shaft
    Included Accessories  Collet / Φ3mm, Φ6mm  Specification  2-speed, with foot switch  Motor  AC100V/200W  Rotation Speed [50/60Hz] (min -1 [rpm])  8000/2900、9600/3500 
    from S$1,999.00
    Min. 8 days
  22. flexible shaft
    TOA flexible shaft
    It can be easily attached to a mic stand, and the position of the mic can be changed freely from side to side.
    Material  steel wire chrome plating 
    from S$38.99
    Min. 3 days
  23. Flexible large grinder Flexible shaft
    YANASE Flexible large grinder Flexible shaft
    * The main body is not included. Only the shaft is available.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,499.00
    Min. 14 days
  24. Popular Type Flexible Shaft for Rotation Integrated 130cm Vertical
    SUNFLAG (SHINKI MFG) Popular Type Flexible Shaft for Rotation Integrated 130cm Vertical
    From professionals to amateurs, you can easily carve and polish wood. For polishing wood, stone, metal, etc.
    Included Accessories  Key stick  Shank Diameter (Φmm)  6  Allowable Torque (Nm)  3.9  Proper rotation speed (min -1 )  2.800～4.000rpm  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$59.99
    Min. 5 days
  25. flexible shaft 2
    YANASE flexible shaft 2
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$169.90
    Min. 6 days
  26. flexible shaft 1
    YANASE flexible shaft 1
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$299.90
    Min. 6 days
  27. flexible extension bar snake shaft
    BEST (Hardware) flexible extension bar snake shaft
    It is very convenient for use in narrow places, along walls, etc. By connecting a screwdriver, hex wrench, torx screw bit and adapter, you can easily work in hard-to-reach places. It can be used at 180°, and can be extended by adding two more. *Please note that it cannot be used with impact drive... Read More
    from S$17.99
    Min. 4 days
  28. Flexible shaft
    YANASE Flexible shaft
    from S$999.00
    Min. 22 days
  29. Motor coupling 11x6
    Sumflex Motor coupling 11x6
    This is a dedicated part that connects the shaft of the motor and the flexible shaft. For effective use of idle motors and various motor tools.
    Included Accessories  Dedicated wrench  Allowable Rotation Speed (min -1 [rpm])  5000 
    Rating:
    60%
    (1)
    Discontinued
  30. Flexible power shaft
    SUNFLAG (SHINKI MFG) Flexible power shaft
    Front and rear handles / oilless metal, chuck specifications / 0.5-6.5 mm, proper work / polishing / drill (up to 4.0 mm), replacement flexible / NO.601-B type. For polishing and drilling. * When using for a long time, be sure to lubricate the metal part.
    Specification  Chuck tolerance / 0.5 to 6.5mm  Mass (g)  1112  Allowable Torque (Nm)  3.9  Proper rotation speed (min -1 )  2800～4000rpm 
    Discontinued
  31. Dedicated flexible cable for 650
    SUNFLAG (SHINKI MFG) Dedicated flexible cable for 650
    Flexible for 650 Replacement parts for 650.
    Mass (g)  892  Allowable Torque (Nm)  3.9  Proper rotation speed (min -1 )  2500～4500rpm 
    Discontinued
  32. Box with motor
    Sumflex Box with motor
    As a power source for the flexible shaft, it comes with a box that is convenient for storage and carrying. For power source of various flexible shafts * 216 type, SJ-1800 type, and CMA-34 type cannot be used.
    Motor  AC100V/200W  Rotation Speed [50/60Hz] (min -1 [rpm])  2800/3470  Suitable Bit Shank Diameter (Φmm)  6 
    Discontinued
  33. Flexible power shaft
    SUNFLAG (SHINKI MFG) Flexible power shaft
    Handle / with oilless metal, collet chuck / 1.0 2.5 3.0 mm, applicable work / precision work. For precision work.
    Mass (g)  126  Allowable Torque (Nm)  1.2  Proper rotation speed (min -1 )  5000～8000rpm 
    Discontinued
  34. Flexible power shaft
    SUNFLAG (SHINKI MFG) Flexible power shaft
    Front and rear handles / oilless metal, regular work / polishing of wood, stone, and metal. For polishing wood, stone, metal, etc. * When using for a long time, be sure to lubricate the metal part.
    Specification  Chuck tolerance / 2.7 to 6.3mm  Mass (g)  1084  Allowable Torque (Nm)  3.9  Proper rotation speed (min -1 )  2800～4000rpm 
    Discontinued
  35. Flexible shaft for MHG-130
    RELIEF Flexible shaft for MHG-130
    Rating:
    80%
    (1)
    Discontinued
  36. Flexible power shaft Small integrated type
    SUNFLAG (SHINKI MFG) Flexible power shaft Small integrated type
    For detailed work such as hobbies. * When using for a long time, be sure to lubricate the metal part.
    Mass (g)  422  Allowable Torque (Nm)  2.1  Proper rotation speed (min -1 )  2000～3000rpm 
    Discontinued
  37. Flexible shaft DX
    PROXXON Flexible shaft DX
    Narrow places, detailed work, etc. * Never use it with electric drills made by other companies.
    Rating:
    100%
    (1)
    Discontinued
  38. Flexible power shaft
    SUNFLAG (SHINKI MFG) Flexible power shaft
    Inner wire replaceable / strong shaft type, front / rear handle, bearing included, chuck specifications / 0.5-6.5 mm, proper work / polishing / drill (up to 4.0 mm) For polishing and drilling. * When using for a long time, be sure to lubricate the metal part.
    Specification  Chuck tolerance / 0.5 to 6.5mm  Mass (g)  1182  Allowable Torque (Nm)  5.9  Proper rotation speed (min -1 )  2800～4000rpm 
    Discontinued
  39. Flexible shaft
    DREMEL Flexible shaft
    Convenient for detailed work and finishing. It conveys the powerful drive of a multi-professional to a fine handpiece that is easy to work with.
    Diameter (Φmm)  Handpiece: Max 24mm / Minimum 14mm 
    Discontinued
  40. Collet chuck (for MHG-001) 2.35mm / 3.0mm
    RELIEF Collet chuck (for MHG-001) 2.35mm / 3.0mm
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 45

Page
Set Ascending Direction