Pneumatic Tool Accessories
Pneumatic tool accessories are parts related to “pneumatic tools” that are driven using the force of compressed air returning. This category includes needles for air chisel used for peeling operations, air sander replacement pads and polishing paper used for polishing operations, and sponge buffs for air polishers. Also included in the pneumatic tool accessories are connecting hoses such as impact wrenches and grinders that protect pneumatic tool connections that generate vibration from vibration.
Other Related Pages
-
- FUJI INDUSTRIAL TECHNIQUE Drill chuck for FRD-6PH-3 (8)Suitable Model FRD-6PH-3-8from S$169.90Min. 8 days
-
- MonotaRO Needle General PurposeDue to the use of special steel, it is tough and has a long life. A highly versatile needle that can be used by various manufacturers. Needle for pneumatic and electric chisel. * Needle for pneumatic / electric chisel. Never use it for any other purpose.
- MASTER AIR Flat eraser padA flat eraser pad used for low-speed drills.Specification With 6Φ adapter Suitable Model MPT38660 Diameter (Φmm) 88 Screw Dimensions 5/16-24 Allowable Rotation Speed (min -1 [rpm]) 4000 RoHS directive (corresponding to 10 substances) Correspondence
-
- TOKU PNEUMATIC Air Hammer Lytopic Hammer (Air type)For concrete chipping work in civil engineering, construction, and building structures. For deburring work.
- FUJI INDUSTRIAL TECHNIQUE FCH-20 type chiselCutting Edge Shape Flat type
- MonotaRO Parts for Air Orbital Sander* Do not use for anything other than its intended purpose.Suitable Model M12 Monotaro Air Orbital Thunder
- AIRREX (Anest Iwata) coil spring"AIR REX" will be Anest Iwata's DIY brandSuitable for TL9534 TL9003 TLX9803
- ESCO Sandblast Exclusive SandSuitable for For EA127B, BB, BK Material Aluminum system Abrasive Grain Size 60
-
- MASTER AIR Gear type eraser padEfficiently scrapes stickers and lines with many corners !! It can be used with low-speed drills, etc.Specification With 6Φ adapter Suitable Model MPT38660 Diameter (Φmm) 100 Screw Dimensions 5/16-24 Allowable Rotation Speed (min -1 [rpm]) 3500 RoHS directive (corresponding to 10 substances) Correspondence
-
-
-
-
-
- UHT (Ushio) Cup GrindStone (For 093/123)For grindingWheel Diameter (Φmm) 30 Mounting Dimensions M7×P0.75
- AIRREX (Anest Iwata) Socket set"AIRREX" is Anest Iwata's DIY brand. It is a set of sockets that are ideal for impact wrenches. Tightening and loosening bolts and nuts.
-
-
-
- TRUSCO Bimetal air saw bladeUses a bimetal saw blade that is hard to break, is strong against impact, and has good sharpness. It can be cut even in a small place. For cutting thin iron plates, thin stainless steel plates, aluminum, plastics, bumper materials, FRP, etc. For finishing woodworking and resin products. For debur... Read MoreMaterial Bimetal high speed Mass (g) 48.2 2018 Trusco page 5 0866from S$48.99Min. 2 days
- LOBSTER (LOBTEX) Shrimp Riveter M NosepieceTip parts for LOBTEX S-type / M-type air riveters and hand riveters * Install a size that matches the diameter of the rivet flange you are using. If rivets of different sizes are used, rivets cannot be performed normally.
- MonotaRO Flat chisel 20mm width for air opener M270FTip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.Suitable for For air archer M270F Material SCM440 Mass (g) 192 Shank Shape Squarefrom S$24.99Min. 2 days
- MonotaRO Air chipper 50 mm wide Flat chisel for M270FTip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.Suitable for For air archer M270F Material SCM440 Mass (g) 265 Shank Shape Squarefrom S$31.99Min. 2 days
-
-
- AIRREX (Anest Iwata) Flat chisel"AIR REX" will be Anest Iwata's DIY brandSpecification Hex axis only Suitable for TLX9803、TL9834
- MonotaRO Nose cap for Air Finish NeiraDedicated replacement part for Monotaro Air Finish Neira. * Do not use for any purpose other than its intended purpose. * Due to model changes, the color will change from red to white.Suitable for MF35、MF57
-
- ESCO # 120 / 1kgx2 sandblast sandMaterial Aluminum system Suitable for For EA127B, BB, BKfrom S$58.99Min. 2 days
- Air Wave (Wa Corp.) Trametme changer (tractor claw replacement air tool)Only the inner tension bar under the grip rotates, so even if the inner tension bar rotates at high speed, you can rest assured that you will not get burned or injured. Tractor claws and halo claws can be replaced using the air impact wrench used to replace tires. Even rusted nuts can be attached... Read MoreAngle of Flexible Head (°) 40 Material (Socket) Cr-Mo (chromium molybdenum steel) Withstand load N ・ m (kgf ・ m) (Horizontal) 592 RoHS directive (corresponding to 10 substances) Correspondence
- UHT (Ushio) Air HoseUshio Hand Tools / Micro Spindle PartsSpecification With band Mass (g) 36
- AIRREX (Anest Iwata) Flat chisel"AIR REX" will be Anest Iwata's DIY brandSuitable Model TL9003/TL9534from S$29.99Min. 2 days
- Compact Tool Paper dust bagA disposable dust suction bag for dust suction sanders.Mass (g) 300
- Compact Tool Duct hoseThe low center of gravity design provides a good sense of stability and excellent usability. Duct hose for dust suction sander Φ19. Putty polishing, woodworking polishing, FRP polishing.Mass (g) 130
- UHT (Ushio) New Soft Wrap (for 093/123)For polishingSpecification 1 rubber pad Diameter (Φmm) 30 Mass (g) 45 Mounting Dimensions M7×P0.75
