All Category

Hammering / Chiseling (Pneumatic)

View : Grid List
Filter

Items 1 - 40 of 211

Set Ascending Direction
  1. Needle General Purpose
    MonotaRO Needle General Purpose
    Due to the use of special steel, it is tough and has a long life. A highly versatile needle that can be used by various manufacturers. Needle for pneumatic and electric chisel. * Needle for pneumatic / electric chisel. Never use it for any other purpose.
    Length (mm)  180 
    Rating:
    91%
    from S$67.99
    Min. 2 days
  2. Air Hammer Lytopic Hammer (Air type)
    TOKU PNEUMATIC Air Hammer Lytopic Hammer (Air type)
    For concrete chipping work in civil engineering, construction, and building structures. For deburring work.
    Rating:
    100%
    from S$14.99
    Min. 2 days
  3. FCH-20 type chisel
    FUJI INDUSTRIAL TECHNIQUE FCH-20 type chisel
    Cutting Edge Shape  Flat type 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  4. Concrete breaker (pneumatic)
    TOKU PNEUMATIC Concrete breaker (pneumatic)
    Rating:
    100%
    from S$29.99
    Min. 2 days
  5. Chischisel for chipper
    Nippon Pneumatic Mfg Chischisel for chipper
    from S$27.99
    Min. 2 days
  6. Flat chisel for chippers
    Nippon Pneumatic Mfg Flat chisel for chippers
    from S$27.99
    Min. 2 days
  7. Flat chisel 20mm width for air opener M270F
    MonotaRO Flat chisel 20mm width for air opener M270F
    Tip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.
    Dimension (mm)  12.7X175  Mass (g)  192  Suitable for  For air archer M270F  Material  SCM440  Shank Shape  Square 
    from S$24.99
    Min. 2 days
  8. Air chipper 50 mm wide Flat chisel for M270F
    MonotaRO Air chipper 50 mm wide Flat chisel for M270F
    Tip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.
    Dimension (mm)  12.7X175  Mass (g)  265  Suitable for  For air archer M270F  Material  SCM440  Shank Shape  Square 
    from S$31.99
    Min. 2 days
  9. Flat chisel
    AIRREX (Anest Iwata) Flat chisel
    Specification  Hex axis only  Suitable for  TLX9803、TL9834 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  10. Flat chisel
    AIRREX (Anest Iwata) Flat chisel
    Suitable Model  TL9003/TL9534 
    from S$25.99
    Min. 2 days
  11. Point chisel
    AIRREX (Anest Iwata) Point chisel
    from S$22.99
    Min. 2 days
  12. FCH-20F / FCH-25 type chisel
    FUJI INDUSTRIAL TECHNIQUE FCH-20F / FCH-25 type chisel
    Suitable Model  FCH-20F・FCH-25  Cutting Edge Shape  Flat bend type 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  13. 0 to 1/4, 1/8, for # 30 drill (copper color)
    ATI 0 to 1/4, 1/8, for # 30 drill (copper color)
    Aircraft sheet metal fasteners. Use special tools for hand pliers. For aircraft
    Mass (g)  16  Trusco Part No.  490-3277  Color  Copper  Suitable for  Drill: for # 30  applicable thickness (inch)  Sheet metal: 0 to 1/4  Material  Steel 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  14. Wide chisel with chisel spring
    Nippon Pneumatic Mfg Wide chisel with chisel spring
    Rating:
    100%
    from S$129.90
    Min. 2 days
  15. Point chisel for air archer M270F
    MonotaRO Point chisel for air archer M270F
    Tip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.
    Dimension (mm)  12.7X175  Mass (g)  183  Suitable for  For air archer M270F  Material  SCM440  Shank Shape  Square 
    from S$24.99
    Min. 2 days
  16. FCH-20F / FCH-25 type chisel
    FUJI INDUSTRIAL TECHNIQUE FCH-20F / FCH-25 type chisel
    Suitable Model  FCH-20F・FCH-25  Cutting Edge Shape  Flat type 
    from S$19.99
    Min. 2 days
  17. Tapered cross bit
    TOKU PNEUMATIC Tapered cross bit
    For drilling holes in rocks.
    Suitable for  TJ-15、TJ-15SV 
    from S$149.90
    Min. 2 days
  18. Flat chisel for New Keren
    Nippon Pneumatic Mfg Flat chisel for New Keren
    Mass (g)  270  Suitable Model  NNK-250、NNK-500、NNK-1000  Width (mm)  38  Trusco Part No.  276-6868  Overall Length (mm)  200 
    Rating:
    100%
    from S$63.99
    Min. 2 days
  19. Point chisel for MOSR with air arch grip handle
    MonotaRO Point chisel for MOSR with air arch grip handle
    Air tip tool for MOSR with grip handle. Tip tool for MOSR with air upper grip handle * Do not use for any other purpose.
    Dimension (mm)  12.6X250  Mass (g)  332  Suitable for  For Archer grip handle MOSR  Shank Shape  Round type  Material  SCM440 
    from S$22.99
    Min. 2 days
  20. Air metal punch
    JTC Air metal punch
    Mass (kg)  1.28  Overall Length (mm)  250  Diameter (Φmm)  5 (Drilling part)  RoHS directive (corresponding to 10 substances)  Correspondence  Thickness (mm)  Maximum use range: Up to 2mm thickness 
    Rating:
    60%
    from S$229.90
    Min. 2 days
  21. 0 to 1/4, 3/32, # 40 drill (zinc color)
    ATI 0 to 1/4, 3/32, # 40 drill (zinc color)
    Aircraft sheet metal fasteners. Use special tools for hand pliers. For aircraft
    Mass (g)  16  Trusco Part No.  490-3218  Suitable for  Drill: for # 40  applicable thickness (inch)  Sheet metal: 0 to 1/4  Material  Steel  Color  Zinc 
    from S$16.99
    Min. 2 days
  22. Vent flat chisel for air opener M270F
    MonotaRO Vent flat chisel for air opener M270F
    Tip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.
    Dimension (mm)  12.7X175  Mass (g)  206  Suitable for  For air archer M270F  Material  SCM440  Shank Shape  Square 
    from S$23.99
    Min. 2 days
  23. 0 to 1/4, 5/32, # 20 drill (black)
    ATI 0 to 1/4, 5/32, # 20 drill (black)
    Aircraft sheet metal fasteners. Use special tools for hand pliers. For aircraft
    Mass (g)  17  Trusco Part No.  490-3331  Color  Black  Suitable for  Drill: For # 21  applicable thickness (inch)  Sheet metal: 0 to 1/4  Material  Steel 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  24. Taper rod
    TOKU PNEUMATIC Taper rod
    Suitable for  TJ-15、TJ-15SV  Shank Diameter (Φmm)  22H×83 
    from S$199.90
    Min. 2 days
  25. Flat chisel 30mm in width for MOSR with air gripper handle
    MonotaRO Flat chisel 30mm in width for MOSR with air gripper handle
    Air tip tool for MOSR with grip handle. Tip tool for MOSR with air upper grip handle * Do not use for any other purpose.
    Dimension (mm)  12.6X250  Mass (g)  364  Suitable for  For Archer grip handle MOSR  Shank Shape  Round type  Material  SCM440 
    from S$22.99
    Min. 2 days
  26. Flat chisel 20mm wide for MOSR with air gripper handle
    MonotaRO Flat chisel 20mm wide for MOSR with air gripper handle
    Air tip tool for MOSR with grip handle. Tip tool for MOSR with air upper grip handle * Do not use for any other purpose.
    Dimension (mm)  12.6X250  Mass (g)  340  Suitable for  For Archer grip handle MOSR  Shank Shape  Round type  Material  SCM440 
    from S$22.99
    Min. 2 days
  27. For chisel NF-00 0
    Nippon Pneumatic Mfg For chisel NF-00 0
    Can be used for welding slag, spatter, rust removal, ideal for woodworking, aluminum chipping, stone carving work
    from S$48.99
    Min. 2 days
  28. Chissel Long
    Nippon Pneumatic Mfg Chissel Long
    Rating:
    100%
    from S$67.99
    Min. 2 days
  29. Chisel for YFC-1L
    YoshidaTools Chisel for YFC-1L
    RoHS directive (corresponding to 10 substances)  Correspondence  Cutting Edge Shape  Flat type  Material  SK-5  Suitable Model  YFC-1L 
    from S$19.99
    Min. 2 days
  30. Chisel for flux hammer
    Nippon Pneumatic Mfg Chisel for flux hammer
    Rating:
    80%
    from S$25.99
    Min. 2 days
  31. Sheet metal chisel 807
    SHINANO Sheet metal chisel 807
    For cutting iron plates
    Overall Length (mm)  152  Trusco Part No.  857-1629  Tip Width (mm)  17  Shank Shape  Round 10.2Φ  Mass (g)  150  Suitable Model  SI-4120A 
    from S$43.99
    Min. 2 days
  32. 0 to 1/4, 3/16, # 10 drill (brass)
    ATI 0 to 1/4, 3/16, # 10 drill (brass)
    Aircraft sheet metal fasteners. Use special tools for hand pliers. For aircraft
    Mass (g)  17  Trusco Part No.  490-3391  Color  Brass  Suitable for  Drill: for # 10  applicable thickness (inch)  Sheet metal: 0 to 1/4  Material  Steel 
    from S$16.99
    Min. 2 days
  33. FC-01SA chisel
    FUJI INDUSTRIAL TECHNIQUE FC-01SA chisel
    Suitable Model  FC-01-4・FC-01SA 
    from S$43.99
    Min. 2 days
  34. FCH-20 type chisel
    FUJI INDUSTRIAL TECHNIQUE FCH-20 type chisel
    Cutting Edge Shape  Blank (blade cutting) 
    from S$29.99
    Min. 7 days
  35. Flat chisel long
    Nippon Pneumatic Mfg Flat chisel long
    from S$67.99
    Min. 2 days
  36. Needle for needle scaler
    FUJI INDUSTRIAL TECHNIQUE Needle for needle scaler
    Length (mm)  180  Suitable for  FNS-2、FNS-2P 
    from S$159.90
    Min. 2 days
  37. For chisel NNK-250-1500
    Nippon Pneumatic Mfg For chisel NNK-250-1500
    Suitable Model  NNK-250、500、750、1000、1500  Specification  NNK-250、500、750、1000、1500 
    Rating:
    80%
    from S$79.99
    Min. 2 days
  38. Pick hammer (pneumatic)
    TOKU PNEUMATIC Pick hammer (pneumatic)
    For concrete chipping work in civil engineering, construction, and building structures. For deburring work.
    Trusco Part No.  470-6234  Shank Shape  Round  Overall Length (mm)  450  Shank length (mm)  80  Suitable Model  TCA-7  Dimension W (mm)  (Cutter / Pat) 75  Mass (kg)  2.3  Shank Diameter (Φmm)  26 
    from S$149.90
    Min. 2 days
  39. Smoothing tool for NBH-400 4K
    Nippon Pneumatic Mfg Smoothing tool for NBH-400 4K
    Remark  4K smoothing tool for NBH-400  Overall Length (mm)  110  Mass (g)  170  Trusco Part No.  753-3179 
    Rating:
    100%
    from S$47.99
    Min. 2 days
  40. Auto chiseler chisel
    Nippon Pneumatic Mfg Auto chiseler chisel
    Suitable Model  NBH-600A 
    from S$38.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 211

Set Ascending Direction