Air Riveter Parts
A riveter is an instrument that strikes rivets with air pressure. It has better operability and power than electric and hand riveters, so it is suitable for hitting a large number of rivets. There are standard and vacuum types of riveter, and the vacuum type is convenient because the shaft does not scatter after hitting a rivet. Unlike bolts and screws, these rivets do not come off easily. Punches that pull rivets are also in this category. You can also choose a super-hard jaw for adding a shaft after hitting a rivet.
Other Related Pages
LOBSTER (LOBTEX) Shrimp Riveter M NosepieceTip parts for LOBTEX S-type / M-type air riveters and hand riveters * Install a size that matches the diameter of the rivet flange you are using. If rivets of different sizes are used, rivets cannot be performed normally.- MonotaRO Replacement Parts for Air Riveter MCCP-500MReplacement part for air riveter MCCP-500M. For replacement of worn parts. * Do not use other than Air Riveter MCCP-500M. * Replace worn parts as soon as possible. * Do not use for any other purpose.Suitable for Air riveter MCCP-500M
- LOBSTER (LOBTEX) Super hard jawSuitable Model AR2000H、AR2000HV、AR021H、AR021EX Type For riveter Mass (g) 9from S$56.99Min. 2 days
- LOBSTER (LOBTEX) LOBSTER Riveter Nosepiece LargeTip parts for LOBTEX Air Riveter (Hand Riveter) (Compatible models only) * Install a size that matches the diameter of the rivet flange you are using. If rivets of different sizes are used, rivets cannot be performed normally. * Available only for compatible models.from S$23.99Min. 2 days
-
-
- LOBSTER (LOBTEX) Jaw pusherSuitable Model AR2000M(V)、AR011MX、AR015MX Mass (g) 10from S$19.99Min. 3 days
- MonotaRO Replacement Parts Air Riveter Stroke 19mm For MCCP-500-19Replacement part for air riveter (stroke 19 mm) MCCP-500-19. For replacement of worn parts. * Do not use for anything other than the air riveter (stroke 19 mm) MCCP-500-19. * Replace worn parts as soon as possible. * Do not use for any other purpose.from S$55.99Min. 2 days
- MonotaRO Replacement Parts for Air Riveter Set M-6303KReplacement part for air riveter set M-6303K. For replacement of worn parts. * Do not use for anything other than the Air Riveter Set M-6303K. * Replace worn parts as soon as possible. * Do not use for any other purpose.Suitable for Air riveter set M-6303Kfrom S$52.99Min. 2 days
-
- LOBSTER (LOBTEX) Jaw pusher springSuitable Model AR2000M(V)、AR011MX、AR015MX Mass (g) 5from S$7.69Min. 2 days
- MUROMOTO TEKKO Standard rivet snap for Nile shot hammerSuitable Model RH20・RH80・RH90・RH100Z・RH200 Material SK3 carbon tool steel (hardened) Head Diameter (Φmm) 20from S$69.99Min. 4 days
-
- MonotaRO Replacement Parts Air Riveter for Hydraulic MR270Replacement part for air riveter (hydraulic type) MR270. For replacement of worn parts. * Do not use for anything other than the air riveter (hydraulic type) MR270. * Replace worn parts as soon as possible. * Do not use for any other purpose.Suitable for Air riveter (hydraulic) MR270from S$55.99Min. 2 days
- ATI 360 degree hand rivet squeezer 3It can be fixed at any angle with a 360 degree yaw lock. Adjustable 3/8 stroke and 5/8 ram so no shims are needed. Cold dimple ring is possible. For aircraftSpecification For 3/16 shank, NSN # 5120-01-221-9097 Material Tool steel reach dimensions (inch) 2-1/2from S$879.90Min. 3 days
- LOBSTER (LOBTEX) Shrimp Riveter Nosepiece 6.4 (S Bolt) B43750Tip parts for LOBTEX Air Riveter (Hand Riveter) (Compatible models only) * It is a nose piece exclusively for S bolt (6.4). * Available only for compatible models.Suitable Model R1A2、R1B2、HR2050H、HR003B Mass (g) 9 Suitable Rivet Diameter (mm) 6.4from S$109.90Min. 2 days
- ATI Spring retainer quick changeSpecification NSN#5130-01-053-7939 Suitable Model ATIATC3X、ATIATC4X Mass (g) 30from S$15.99Min. 4 days
- Cherry Jaw for pulling headA JAW that bites the stem built into the PULLING head. It is a replacement part when the attached JAW is worn.Mass (g) 2from S$159.90Min. 4 days
-
-
-
-
- Cherry Grip gaugeA gauge that allows you to check the thickness of the base material and the diameter of the rivet at a glance.Specification Measurable up to GRIP LENGTH-18 Material Stainless steel Mass (g) 15.5from S$87.99Min. 4 days
-
-
- ATI Micro mirror cutterA cutter used to remove crimped rivets. Can be used with the micro rivet shaver ATI429SXC or a standard 1/4 inch-28 thread micromirror. For the aircraft industrySpecification ATI micro mirror cutter Material Tool steelfrom S$64.99Min. 4 days
- Cherry Nosepiece for pulling headThis is the part that comes into contact with the rivet attached to the tip of the PULLING head. It is a replacement part when it wears out.Mass (g) 2from S$159.90Min. 4 days
- Cherry adapterThis adapter is required when attaching the H827-8 / H828-8 to the G84.Suitable Model G84 Material Steel Mass (g) 5from S$699.90Min. 4 days
- Cherry PULLING HEAD Straight typeA straight type PULLING head that is used in combination with the G746A to rivet the Cherry LOCK A rivet-3.Mass (g) 90 Total Length (inch) 2-3/8from S$1,499.00Min. 4 days
- ATI 360 degree hand rivet squeezer 1-1 / 2It can be fixed at any angle with a 360 degree yaw lock. Adjustable 3/8 stroke and 5/8 ram so no shims are needed. Cold dimple ring is possible. For aircraftSpecification For 3/16 shank, NSN # 5120-00-928-6628 Material Tool steel reach dimensions (inch) 1-1/2from S$779.90Min. 3 days
- Cherry PULLING HEAD Straight typeA straight type PULLING head that is attached to the head when using the G800.Mass (g) 70 Suitable Jaw 701B18 Total Length (inch) 2.34 rivet diameter working range (inch) 1/8、5/32、3/16from S$649.90Min. 4 days
-
- ATI Screw removal tool 7-1 / 2 inchSpecification 401 Shank Suitable for 1/4 inch hex bit compatible Material Tool steel Mass (g) 544 Total Length (inch) 7-1/2from S$119.90Min. 4 days
- ATI Screw removal tool 9 inchIt is used to remove hardened screws, etc. For the aircraft industrySpecification 401 Shank, NSN # 5130-01-368-4504 Material Tool steel Mass (g) 641 Total Length (inch) 9 Square Drive (inch) 3/8from S$119.90Min. 4 days
- TRUSCO Air riveterSuitable Jaw TAR-JAW Suitable Rivet Diameters (Φmm) 2.4、3.2、4.0、4.8 Use nozzle piece TAR-NP24、TAR-NP32、TAR-NP40、TAR-NP48from S$879.90Min. 4 days
- ATI Retainer spring bee hive typeSpecification NSN#5130-01-048-3113 Suitable Model ATIATC3X、ATIATC4X Mass (g) 39from S$17.99Min. 4 days
- Cherry Air leaderIt is a tool for bleeding air and filling oil in the power tool.Suitable Model G702A、G704B、G746A、G84、G800 Material Polycarbonate Mass (g) 111.5from S$779.90Min. 4 days
- NIPPON POP RIVETS AND FASTENERS Joe for pop riveterSuitable Model PB3400-JP Mass (g) 4from S$119.90Min. 32 days
- ATI Hand rivet squeezer 2-1 / 2Jou heat-treats tool steel to give it strength. The 18-inch handle does not require a lot of force. For aircraftSpecification For 3/16 shank, NSN # 5120-01-334-6450 Material Tool steel reach dimensions (inch) 2-1/2from S$779.90Min. 4 days
