All Category

Hammering / Chiseling

Peeling tools are used to remove metal that has melted and spattered during welding, such as particles (spatter), rust, paint, etc., or to cut rocks. Tools that use the compressed air to move the needle bundle at high speed and perform the peeling work are called air needle scalers and air chisels. A variety of peeling tools are available depending on the application, such as compact, lightweight and powerful, and those with minimal vibration.
View : Grid List
Filter

Items 1 - 40 of 254

Set Ascending Direction
  1. Air needle chiseler
    ESCO Air needle chiseler
    Operating Pressure (MPa)  0.64 
    Rating:
    95%
    from S$269.90
    Min. 2 days
  2. Baby Riveting Hammer (for BRH) Snap C <Sara>
    YOKOTA INDUSTRIAL Baby Riveting Hammer (for BRH) Snap C <Sara>
    YOKOTA INDUSTRY's riveting hammer BRH combined use, snap C type (flat tip type). For the snap receiver, use BRH combined snap buffer C.
    Mass (g)  285  Trusco Part No.  828-9348 
    from S$48.99
    Min. 3 days
  3. Concrete breaker
    TOKU PNEUMATIC Concrete breaker
    The TCB type is easy to use with strong striking force and little recoil, and we have a wide variety of models from small chipping to heavy work.
    Air Connection (inch)  Hose Inner Diameter (Φmm)  19(3/4)  Specification  Junk size / Φ26 × 80L  Air Consumption (m3/min)  1.05  Number ofImpact (min -1 [times / min])  1400  Stroke (mm)  130  Mass (kg)  15  Trusco Part No.  380-9056  Overall Length (mm)  490  Piston Diameter (Φmm)  35 
    from S$1,199.00
    Min. 3 days
  4. Air hammer set
    PAOCK Air hammer set
    Convenient for chipping concrete, peeling paint, and cutting thin iron plates.
    Outlet  (Chisel) 10.2  Plug  (Mounting diameter) Rc1 / 4  Maximum Operating Pressure (MPa)  0.58  Air Consumption (L/min)  112  Stroke numbers (min)  3000 
    from S$119.90
    Min. 4 days
  5. Light breaker (Air type)
    TOKU PNEUMATIC Light breaker (Air type)
    Stroke (mm)  97  Piston Diameter (Φmm)  36  Air Consumption (m3/min)  1.2  Number of hits (bpm)  1800  Mass (kg)  9.3  Hose Inner Diameter (Φmm)  19 
    from S$979.90
    Min. 32 days
  6. Hammer drill (pneumatic)
    TOKU PNEUMATIC Hammer drill (pneumatic)
    Anti-vibration type protects you from vibration damage. It has a wide working range and a drilling capacity of 13 to 28 mm. For drilling work for general civil engineering construction work and chemical anchor construction.
    Air Consumption (m3/min)  0.8  Hose Inner Diameter (Φmm)  12.7  Stroke (mm)  31  Number of hits (bpm)  3200  Piston Diameter (Φmm)  38×22  Overall Length (mm)  400  Trusco Part No.  483-7851  Mass (kg)  6.5  Specification  Air inlet 3 / 8PT  Direction of Rotation  Right 
    from S$2,299.00
    Min. 32 days
  7. Needle Scaler, Air Type
    MonotaRO Needle Scaler, Air Type
    Quickly removes rust that does not come off with a wire brush. Commercially available needles can be used. For removing rust on the beat part of iron wheels For removing severe rust such as salt damage For removing welding slag * Do not use for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  1.98  Piston Diameter (Φmm)  19  Number of Needles  19  Overall Length (mm)  317  Needle Length (mm)  3Φ×180  No-load speed (min-1 4500  Air Consumption (L/min)  99 
    Rating:
    70%
    from S$229.90
    Min. 2 days
  8. Air hammer (hexagonal shaft)
    AIRREX (Anest Iwata) Air hammer (hexagonal shaft)
    "AIR REX" is Anest Iwata's DIY brand. Hammer bits do not rotate and can accurately target the target.
    Hex Width Across (mm)  10 
    Rating:
    84%
    from S$68.99
    Min. 2 days
  9. Air Archer
    MonotaRO Air Archer
    It is an air type and is convenient for removing spatter and sticky substances. For rust removal and chipping work * Do not use for any other purpose.
    Air Consumption (m3/min)  0.2  Suitable Air Pressure (MPa)  0.62  Mass (kg)  1.8  Stroke (mm)  33  Overall Length (mm)  341  No-load speed (min-1 5000  Included Accessories  Chisel x1  Air Hose Connection  PT1/4 
    Rating:
    80%
    from S$219.90
    Min. 2 days
  10. Air Hammer
    AIRREX (Anest Iwata) Air Hammer
    Size (mm)  (Hammer Bit) 0.401 Parker Taper  Maximum Operating Pressure (MPa)  0.59 
    Rating:
    90%
    from S$97.99
    Min. 2 days
  11. Air hammer set + hex shaft
    MonotaRO Air hammer set + hex shaft
    A hexagonal shaft type air hammer set that can be chipped. For chipping work * Do not use an air hose that is deteriorated or scratched as it may explode. Before connecting the air hose, make sure that air is not supplied by the operating lever of the air hammer. Before replacing the tip tool, re... Read More
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  1.45  Overall Length (mm)  172  No-load speed (min-1 3000  Suitable Hose Diameter (Φmm)  9.5  Air Consumption (L/min)  98  Type  Hex axis  Air Hose Connection  PT1/4 
    Rating:
    87%
    from S$68.99
    Min. 2 days
  12. Needle scaler
    AIRREX (Anest Iwata) Needle scaler
    "AIRREX" is Anest Iwata's DIY brand. By attaching it to an air hammer, it becomes a needle skater.
    Number of Needles  19 pieces  Needle (mm)  Φ3 
    from S$64.99
    Min. 2 days
  13. Flux chipper
    FUJI INDUSTRIAL TECHNIQUE Flux chipper
    It is compact, lightweight, strong, easy to work with, and has excellent durability.
    Hose Connection  PT1/4  Other  Tagane is sold separately. 
    Rating:
    75%
    from S$299.90
    Min. 2 days
  14. Air Wrapper Lightweight Type
    MonotaRO Air Wrapper Lightweight Type
    As it is small and lightweight, it has excellent workability. Rust remover, paint remover * Do not use for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  1.12  Overall Length (mm)  235  Stroke (mm)  28  No-load speed (min-1 4800  Suitable Hose Diameter (Φmm)  9.5  Air Consumption (m3/min)  About 0.057  Included Accessories  Chisel x1  Air Hose Connection  PT1/4 
    from S$149.90
    Min. 2 days
  15. Flux hammer
    Nippon Pneumatic Mfg Flux hammer
    It is small, lightweight and easy to handle. For a wide range of work applications such as welding steel removal, rust removal, paint removal, woodworking, aluminum chipping, and stone carving.
    Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc1/4 
    Rating:
    100%
    from S$329.90
    Min. 2 days
  16. NPK Chipper Round Drive
    Nippon Pneumatic Mfg NPK Chipper Round Drive
    Type of Connection  Round 
    Rating:
    80%
    from S$589.90
    Min. 2 days
  17. Air wrapper with grip handle
    MonotaRO Air wrapper with grip handle
    Since the handle shape is a grip type, it is suitable for heavy work. Rust remover, paint remover * Do not use for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  1.6  Suitable Diameter (Φmm)  12.6  Overall Length (mm)  257  No-load speed (min-1 3000  Stroke (mm)  58  Suitable Hose Diameter (Φmm)  9.5  Air Consumption (m3/min)  About 0.21  Air Hose Connection  PT1/4 
    from S$299.90
    Min. 2 days
  18. Needle scaler straight type
    MonotaRO Needle scaler straight type
    Quickly removes rust that does not come off with a wire brush. Commercially available needles can be used. For removing rust from the beat part of iron wheels. For severe rust removal such as salt damage. For welding slag removal. * Do not use an air hose that is deteriorated or scratched as it m... Read More
    Suitable Air Pressure (MPa)  0.62  Number of Needles  19  Mass (kg)  2.8  Air Consumption (L/min)  232  Piston Diameter (Φmm)  25  Needle Length (mm)  3Φ×180  No-load speed (min-1 4600  Suitable Hose Diameter (Φmm)  9.5  Air Hose Connection  PT1/4  Included Accessories  PT1/4 coupler, dustproof rubber cap  Stroke (mm)  Piston/28.2  Dimension (mm)  Width 86 x total length 378 
    from S$269.90
    Min. 2 days
  19. Needle chisel (Φ3mm × 12)
    KUKEN Needle chisel (Φ3mm × 12)
    Smooth peeling work !! Slag removal after welding Concrete / rock roughening Iron plate rust / paint removal Casting sand removal
    Air Consumption (Nm3/min)  0.15  Overall Length (mm)  210 (excluding needle)  Trusco Part No.  364-0922  Number of Needles  12  Needle Length (mm)  Φ3×125  Included Accessories  Coupling plug 20PM x 1  Hose Connection  Rc1/4  Mass (kg)  1.2 (without needle)  Air Hose Inner Diameter (Φmm)  6.5  Compressor (kW)  2.2 
    Rating:
    60%
    from S$489.90
    Min. 2 days
  20. Lie Topic Hammer
    TOKU PNEUMATIC Lie Topic Hammer
    The Lytopic Hammer is compact and lightweight, and has excellent crushing power, workability, and durability. Ideal for civil engineering, construction, thin concrete chipping work of building structures, deburring, and roughing bush hammer work. It is also widely used for auxiliary work such as ... Read More
    Air Consumption (m3/min)  0.5  Hose Inner Diameter (Φmm)  12.7(1/2)  Number ofImpact (min -1 [times / min])  2400  Piston Diameter (Φmm)  28  Air Connection (inch)  3/8  Overall Length (mm)  330  Mass (kg)  5.9  Stroke (mm)  79  Specification  Junk size / Φ17.45  Type  Rounding 
    Rating:
    80%
    from S$649.90
    Min. 2 days
  21. Air hammer
    AIRREX (Anest Iwata) Air hammer
    "AIRREX" is Anest Iwata's DIY brand. It is a tool for chipping for do-it-yourselfers. By replacing the hammer bit, you can hang small concrete pieces and peel off tiles and paint. Comes with an air volume adjustment knob. Uses a rubber grip that reduces vibration. Peel off tiles and... Read More
    Maximum Operating Pressure (MPa)  0.59  Air Consumption (L/min)  170  compressor  2 horsepower or more recommended  Number of Impacts (min-1 [impacts/min])  5000  Width (mm)  Flat chisel: 20  Size  Hammer bit size: 0.401mm Parker taper  Outlet Shape  Round type 
    Rating:
    80%
    from S$56.99
    Min. 2 days
  22. LITE TOP hammer (square chisel type)
    TOKU PNEUMATIC LITE TOP hammer (square chisel type)
    It is small and lightweight, and has excellent crushing power, workability, and durability. Concrete chipping work for civil engineering, construction, and building structures. Deburring work, etc.
    Suitable Air Pressure (MPa)  0.59  Hose Inner Diameter (Φmm)  12.7  Hose Connection  Rc3/8  Exhaust direction  Rear  Shank  Square 
    from S$559.90
    Min. 2 days
  23. Earchzel
    ESCO Earchzel
    Operating Pressure (MPa)  0.64  Required Compressor (kw)  1.5  Mass (kg)  1.6  Suction Nozzle Size  1/4inchPT  Air Consumption (L/min)  157  Overall Length (mm)  210  Number ofImpact (min -1 [times / min])  3000  Case Dimensions (mm)  320×250×95  Stroke (mm)  66  Esco Part No.  EA159SA 
    Rating:
    93%
    from S$139.90
    Min. 2 days
  24. Rai topic hammer chisel round type
    TOKU PNEUMATIC Rai topic hammer chisel round type
    It is small and lightweight, and has excellent crushing power, workability, and durability. Concrete chipping work for civil engineering, construction, and building structures. Deburring work, etc.
    Suitable Air Pressure (MPa)  0.59  Hose Connection  Rc3/8  Exhaust direction  Rear 
    from S$649.90
    Min. 2 days
  25. New Keren
    Nippon Pneumatic Mfg New Keren
    For removing mud and rust from construction machinery, removing concrete from various panels, chipping floors, removing rust and shells from ships, and other chipping work.
    Air Consumption (m3/min)  0.45  Suitable Air Pressure (MPa)  0.6  Stroke (mm)  23  Piston Diameter (Φmm)  25.4  No-load speed (min-1 4000  Hose Inner Diameter (Φmm)  9.5  Hose Connection  Rc3/8 
    from S$979.90
    Min. 2 days
  26. Chipper
    YoshidaTools Chipper
    YOSHIDA's chippers (YFC series) are designed to be compact, lightweight, high power and easy to use. The piston valve mechanism of this machine can maintain a high number of hits and consumes less air, so it can be used with small compressors. The direction of the chisel can be set freely fro... Read More
    Recommended Hose Diameter (mm)  6.3  Air Consumption (Nm3/min)  (Maximum) 0.14  Piston Diameter (Φmm)  20  Number of Impacts (Hz)  90  Maximum Outer Diameter (mm)  36  Stroke (mm)  16  Handle  lever 
    from S$199.90
    Min. 2 days
  27. Needle scaler
    YoshidaTools Needle scaler
    YOSHIDA's Needle Scaler (YNS-1 Series) is designed to be compact, lightweight, high power and easy to use. It is designed to be used even on uneven or uneven surfaces. It maintains a high number of hits and enables easy needle replacement. It can be used with a small compressor. Ideal for scr... Read More
    Needle (mm)  3×180-12  Air Consumption (Nm3/min)  (Maximum) 0.14  Overall Length (mm)  196  Mass (kg)  0.97 (no needle)  Recommended Hose Diameter (mm)  9.5  Piston Diameter (Φmm)  20  Maximum Outer Diameter (mm)  36  Number of Impacts (Hz)  90  Handle  lever 
    from S$399.90
    Min. 2 days
  28. Air needle scaler
    TOKU PNEUMATIC Air needle scaler
    It is small and lightweight and has a strong striking force. Removes mud and rust from construction machinery and removes beads after welding.
    Hose Inner Diameter (Φmm)  Specification  Air inlet 1 / 4PT, hose inlet PT1 / 4  Piston Diameter (Φmm)  Φ20 
    from S$389.90
    Min. 2 days
  29. NPK Chipper Hexagon Drive
    Nippon Pneumatic Mfg NPK Chipper Hexagon Drive
    Type of Connection  Square corner 
    from S$589.90
    Min. 2 days
  30. Baby riveting hammer (for BRH-6 6A) snap D 6mm
    YOKOTA INDUSTRIAL Baby riveting hammer (for BRH-6 6A) snap D 6mm
    Snap D type (for rivet shaft diameter 6 mm) for YOKOTA Air Riveting Hammer BRH-6_6A. For snap receiver, use BRH-6_6A snap buffer A.
    Trusco Part No.  828-9349  Mass (g)  105 
    Rating:
    60%
    from S$48.99
    Min. 2 days
  31. Flux chipper (for F-20) chisel H9X130
    YOKOTA INDUSTRIAL Flux chipper (for F-20) chisel H9X130
    YOKOTA INDUSTRY Flux Chipper For, straight (flat) chisel.
    Mass (g)  85  Trusco Part No.  828-9368 
    from S$24.99
    Min. 2 days
  32. Flux chipper (for F-20F) chisel curved flat 25X155
    YOKOTA INDUSTRIAL Flux chipper (for F-20F) chisel curved flat 25X155
    YOKOTA INDUSTRY Flux Chipper It is a song flat chisel.
    Mass (g)  160  Trusco Part No.  828-9362 
    from S$27.99
    Min. 2 days
  33. Flux chipper
    YOKOTA INDUSTRIAL Flux chipper
    It is a powerful chipping ability. Supports masonry, woodworking, and aluminum chipping work.
    Suitable Air Pressure (MPa)  0.4~0.6  No-load speed (min-1 12000  Hose Connection  Rc1/4 
    Rating:
    60%
    from S$199.90
    Min. 2 days
  34. Needle scaler straight
    FUJI INDUSTRIAL TECHNIQUE Needle scaler straight
    Ideal for scraping rough surfaces of rocks and concrete, welding solvents, rust and paint on castings. It is designed to be used even on uneven or uneven surfaces.
    Stroke (mm)  Overall Length (mm)  325  Needle Length (mm)  180  Air Consumption (m3/min)  0.18 (number of hits)  Mass (kg)  1.9  Piston Diameter (Φmm)  25.0 
    Rating:
    100%
    from S$499.90
    Min. 2 days
  35. 10.2x216mm chisel for air (flat / wide)
    ESCO 10.2x216mm chisel for air (flat / wide)
    Esco Part No.  EA159SD-12 
    from S$42.99
    Min. 2 days
  36. Riveting Hammer
    URYU SEISAKU Riveting Hammer
    Small diameter caulking and work tools. For crimping snaps and driving pins.
    Suitable Air Pressure (MPa)  0.6 
    Rating:
    100%
    from S$329.90
    Min. 2 days
  37. TFC-200 cutting edge straight flat 9MM × 155L
    TOKU PNEUMATIC TFC-200 cutting edge straight flat 9MM × 155L
    from S$45.99
    Min. 2 days
  38. Needle scaler pistol type
    FUJI INDUSTRIAL TECHNIQUE Needle scaler pistol type
    Ideal for scraping rough surfaces of rocks and concrete, welding solvents, rust and paint on castings. It is designed to be used even on uneven or uneven surfaces.
    Piston Diameter (Φmm)  25.0  Stroke (mm)  Mass (kg)  2.5  Overall Length (mm)  371  Air Consumption (m3/min)  0.18 (number of hits)  Needle Length (mm)  180 
    from S$539.90
    Min. 2 days
  39. Riveting hammer pistol type
    URYU SEISAKU Riveting hammer pistol type
    Small diameter caulking and work tools. The snap insertion is a round type. For crimping snaps and driving pins
    Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc1/4 
    from S$439.90
    Min. 2 days
  40. 10.2x445mm Long chisel for air
    ESCO 10.2x445mm Long chisel for air
    Esco Part No.  EA159SD-32 
    from S$78.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 254

Set Ascending Direction