Website Maintenance Announcement

How to Use
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Air Hammers

An air hammer is a pneumatic tool that is used to crush or scrape concrete products and rocks by moving the hammer using compressed air as power. In the cylinder inside the machine, there is a piston that moves up and down by compressed air, and the attached hammer operates by its vibration. Many small and lightweight types with excellent workability, durability, and crushing power are widely used. Care should be taken not to exceed the product durability and crushing force when carrying out the lifting work on thick concrete products and bedrock.

Other Related Pages

  1. iwata compressor singapore
  2. m5x50 bolt
  3. earthman compressor
  4. heavy duty makita hammer drill
View : Grid List
Filter

Items 1 - 40 of 109

Page
Set Ascending Direction
  1. Baby Riveting Hammer (For BRH) Snap C <Sara>
    YOKOTA INDUSTRIAL Baby Riveting Hammer (For BRH) Snap C <Sara>
    YOKOTA INDUSTRY's riveting hammer BRH combined use, snap C type (flat tip type). For the snap receiver, use BRH combined snap buffer C.
    Mass (g)  285 
    from S$47.99
    Min. 2 days
  2. Concrete breaker
    TOKU PNEUMATIC Concrete breaker
    The TCB type is easy to use with strong striking force and little recoil, and we have a wide variety of models from small chipping to heavy work.
    Specification  Junk size / Φ26 × 80L  Number ofImpact (min -1 [times / min])  1400  Hose Inner Diameter (Φmm)  19(3/4)  Air Connection (inch)  1  Piston Diameter (Φmm)  35 
    from S$1,299.00
    Min. 2 days
  3. Air hammer set
    PAOCK Air hammer set
    Convenient for chipping concrete, peeling paint, and cutting thin iron plates.
    Maximum Operating Pressure (MPa)  0.58  Air Consumption (L/min)  112  Plug  (Mounting diameter) Rc1 / 4  Outlet  (Chisel) 10.2  Stroke numbers (min)  3000 
    from S$149.90
    Min. 4 days
  4. Light breaker (Air type)
    TOKU PNEUMATIC Light breaker (Air type)
    Hose Inner Diameter (Φmm)  19  Piston Diameter (Φmm)  36  Number of hits (bpm)  1800 
    from S$1,199.00
    Min. 4 days
  5. Hammer drill (pneumatic)
    TOKU PNEUMATIC Hammer drill (pneumatic)
    Anti-vibration type protects you from vibration damage. It has a wide working range and a drilling capacity of 13 to 28 mm. For drilling work for general civil engineering construction work and chemical anchor construction.
    Specification  Air inlet 3 / 8PT  Hose Inner Diameter (Φmm)  12.7  Direction of Rotation  Right  Piston Diameter (Φmm)  38×22  Number of hits (bpm)  3200 
    from S$2,499.00
    Min. 4 days
  6. Air hammer (hexagonal shaft)
    AIRREX (Anest Iwata) Air hammer (hexagonal shaft)
    "AIR REX" is Anest Iwata's DIY brand. Hammer bits do not rotate and can accurately target the target.
    Rating:
    84%
    (9)
    from S$89.99
    Min. 2 days
  7. Air Hammer
    AIRREX (Anest Iwata) Air Hammer
    "AIR REX" will be Anest Iwata's DIY brand
    Maximum Operating Pressure (MPa)  0.59 
    Rating:
    90%
    (2)
    from S$129.90
    Min. 2 days
  8. Air hammer set + hex shaft
    MonotaRO Air hammer set + hex shaft
    A hexagonal shaft type air hammer set that can be chipped. For chipping work * Do not use an air hose that is deteriorated or scratched as it may explode. Before connecting the air hose, make sure that air is not supplied by the operating lever of the air hammer. Before replacing the tip tool, re... Read More
    Type  Hex axis  Air Consumption (L/min)  98  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  PT1/4  No-load speed (min-1)  3000  Suitable Hose Diameter (Φmm)  9.5 
    Rating:
    87%
    (3)
    from S$57.99
    Min. 2 days
  9. Lie Topic Hammer
    TOKU PNEUMATIC Lie Topic Hammer
    The Lytopic Hammer is compact and lightweight, and has excellent crushing power, workability, and durability. Ideal for civil engineering, construction, thin concrete chipping work of building structures, deburring, and roughening bishan work. It is also used in a wide range of areas such as sewe... Read More
    Specification  Junk size / Φ17.45  Type  Rounding  Number ofImpact (min -1 [times / min])  2400  Shank  Round  Hose Inner Diameter (Φmm)  12.7(1/2)  Air Connection (inch)  3/8  Piston Diameter (Φmm)  28 
    Rating:
    80%
    (1)
    from S$699.90
    Min. 2 days
  10. Air hammer
    AIRREX (Anest Iwata) Air hammer
    "AIRREX" is Anest Iwata's DIY brand. It is a tool for chipping for do-it-yourselfers. By replacing the hammer bit, you can hang small concrete pieces and peel off tiles and paint. Comes with an air volume adjustment knob. Uses a rubber grip that reduces vibration. Peel off tiles and... Read More
    Size  Hammer bit size: 0.401mm Parker taper  Air Consumption (L/min)  170  Maximum Operating Pressure (MPa)  0.59  Number of Impacts (min-1 [impacts/min])  5000  compressor  2 horsepower or more recommended  Outlet Shape  Round type 
    Rating:
    80%
    (1)
    from S$69.99
    Min. 2 days
  11. LITE TOP hammer (square chisel type)
    TOKU PNEUMATIC LITE TOP hammer (square chisel type)
    It is small and lightweight, and has excellent crushing power, workability, and durability. Concrete chipping work for civil engineering, construction, and building structures. Deburring work, etc.
    Shank  Square  Hose Inner Diameter (Φmm)  12.7  Suitable Air Pressure (MPa)  0.59  Hose Connection  Rc3/8  Exhaust direction  Rear 
    from S$599.90
    Min. 2 days
  12. Rai topic hammer chisel round type
    TOKU PNEUMATIC Rai topic hammer chisel round type
    It is small and lightweight, and has excellent crushing power, workability, and durability. Concrete chipping work for civil engineering, construction, and building structures. Deburring work, etc.
    Suitable Air Pressure (MPa)  0.59  Hose Connection  Rc3/8  Exhaust direction  Rear 
    from S$749.90
    Min. 2 days
  13. Baby riveting hammer (for BRH-6 6A) snap D 6mm
    YOKOTA INDUSTRIAL Baby riveting hammer (for BRH-6 6A) snap D 6mm
    Snap D type (for rivet shaft diameter 6 mm) for YOKOTA Air Riveting Hammer BRH-6_6A. For snap receiver, use BRH-6_6A snap buffer A.
    Mass (g)  105 
    Rating:
    60%
    (1)
    from S$48.99
    Min. 2 days
  14. Riveting Hammer
    URYU SEISAKU Riveting Hammer
    Small diameter caulking and work tools. For crimping snaps and driving pins.
    Suitable Air Pressure (MPa)  0.6 
    Rating:
    100%
    (1)
    from S$389.90
    Min. 2 days
  15. Riveting hammer pistol type
    URYU SEISAKU Riveting hammer pistol type
    Small diameter caulking and work tools. The snap insertion is a round type. For crimping snaps and driving pins
    Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc1/4 
    from S$469.90
    Min. 3 days
  16. Riveting Hammer
    YOKOTA INDUSTRIAL Riveting Hammer
    Hose Connection  Rc1/4 
    from S$489.90
    Min. 3 days
  17. Pick hammer
    TOKU PNEUMATIC Pick hammer
    Due to its simple structure, it works reliably just by pressing the chisel. The most popular light crushing hammer. Crushing of buildings and foundations and crushing of asphalt. * Operating air pressure 0.6MPa (6.0kgf / cm 2 ) is required. * Please contact us for chisel.
    Specification  Air type  Diameter (Φmm)  (Stroke) 120  Compressed Air Connection  3/4PT  Piston Diameter (Φmm)  35  Number of hits (bpm)  1250 
    from S$779.90
    Min. 2 days
  18. NPK Sandranma small lever type 30028
    Nippon Pneumatic Mfg NPK Sandranma small lever type 30028
    It is strong and has little recoil. It is a lever type. For work such as sand hardening of castings and refractory brick hardening
    Set Contents  Hose nipple, nipplestead  Hose Inner Diameter (Φmm)  9.5  Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc1/4  Piston Diameter (Φmm)  18  ramming area diameter (mm)  40 
    from S$769.90
    Min. 2 days
  19. Air hammer
    SP AIR Air hammer
    By exchanging various chisels, you can perform chipping work and spot peeling work. Attach each chisel to remove rust from mufflers and pipes, and cut body panels. For concrete, stone and metal chipping work.
    Specification  Built-in air regulator  Suitable Air Pressure (MPa)  0.62  Hose Connection  NPT1/4  No-load speed (min-1)  3000  Exhaust direction  Forward 
    Rating:
    80%
    (1)
    from S$569.90
    Min. 11 days
  20. Scaling Hammer
    YOKOTA INDUSTRIAL Scaling Hammer
    Included Accessories  Touch joint (1 piece)  Specification  Number of impacts: 8000B.PM  Air Pressure (MPa)  0.6  Air Consumption (L/min ANR)  Under load: 350  Hose Connection  3/8Rc  Suitable Hose Diameter (Φmm)  12.7 
    from S$289.90
    Min. 5 days
  21. Spring holder
    SSPOWER Spring holder
    A spring holder for air hammers. As a spring holder for air hammers.
    Suitable Model  AH-10.2PA 
    from S$12.99
    Min. 2 days
  22. Air hammer set
    JTC Air hammer set
    The rust on the ball joint can be easily peeled off by striking vibration.
    Speed  2100bpm  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$329.90
    Min. 2 days
  23. Riveting hammer
    URYU SEISAKU Riveting hammer
    Hose Connection  Rc1/4 
    from S$399.90
    Min. 6 days
  24. Concrete breaker
    TOKU PNEUMATIC Concrete breaker
    The TCB type is easy to use with strong striking force and little recoil, and we have a wide variety of models from small chipping to heavy work.
    Specification  Junk size / Φ30 × 88L  Number ofImpact (min -1 [times / min])  1050  Hose Inner Diameter (Φmm)  19(3/4)  Air Connection (inch)  1  Piston Diameter (Φmm)  40 
    from S$1,399.00
    Min. 3 days
  25. Baby riveting hammer (for BRH-3) snap buffer A
    YOKOTA INDUSTRIAL Baby riveting hammer (for BRH-3) snap buffer A
    Snap buffer (snap receiver) A type for YOKOTA Air Riveting Hammer BRH-3. Please use for BRH-3 snap D <3mm>.
    Mass (g)  65 
    from S$5.59
    Min. 10 days
  26. Baby riveting hammer (BRH combined use) snap buffer C
    YOKOTA INDUSTRIAL Baby riveting hammer (BRH combined use) snap buffer C
    YOKOTA INDUSTRY Riveting Hammer BRH combined use, snap buffer (snap receiver) C type. Please use for BRH combined snap C <sara>.
    Mass (g)  45 
    from S$7.39
    Min. 10 days
  27. Fuji Sand Rammer
    FUJI INDUSTRIAL TECHNIQUE Fuji Sand Rammer
    from S$869.90
    Min. 8 days
  28. Sandranma
    TOKU PNEUMATIC Sandranma
    It is an excellent product that has a stable number of strokes and striking force, and aims to equalize the pressure and improve the working ability. By adopting a unique plate valve, you can work comfortably with little recoil. Please use it with confidence for backfilling of electrical construc... Read More
    Material  Iron  Size  Air inlet 3 / 8PT  Air Hose Inner Diameter (Φmm)  12.7 
    from S$769.90
    Min. 3 days
  29. Baby Riveting Hammer (for BRH-3) Snap D 3mm
    YOKOTA INDUSTRIAL Baby Riveting Hammer (for BRH-3) Snap D 3mm
    Snap D type (for rivet shaft diameter 3 mm) for YOKOTA Air Riveting Hammer BRH-3. Use BRH-3 snap buffer A for the snap receiver.
    Mass (g)  80 
    Rating:
    100%
    (1)
    from S$48.99
    Min. 4 days
  30. Chipping caulking hammer
    FUJI INDUSTRIAL TECHNIQUE Chipping caulking hammer
    It has excellent durability and is ideal for chipping and caulking work such as concrete, masonry, and welding solvents.
    from S$999.00
    Min. 8 days
  31. Rock drill (pneumatic)
    TOKU PNEUMATIC Rock drill (pneumatic)
    Strong drilling power and outstanding durability. It is an air type. For drilling work in washbasin repair work, concrete, bedrock, tunnel propulsion work, etc. * Operating air pressure of 0.6MPa is required.
    Hose Inner Diameter (Φmm)  19  Piston Diameter (Φmm)  54  Number of hits (bpm)  2450 
    from S$2,999.00
    Min. 3 days
  32. Baby riveting hammer (for BRH-6 6A) snap buffer A
    YOKOTA INDUSTRIAL Baby riveting hammer (for BRH-6 6A) snap buffer A
    Snap buffer (snap receiver) A type for YOKOTA Air Riveting Hammer BRH-6_6A. Please use for BRH-6 snap D <6mm>.
    Mass (g)  65 
    from S$5.59
    Min. 5 days
  33. Flux hammer
    Nippon Pneumatic Mfg Flux hammer
    Small, lightweight and easy to handle. The chisel is easy to replace. For a wide range of work applications such as steel removal, rust removal, paint removal for welding, woodworking, aluminum chipping, and stone carving.
    Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc1/4  No-load speed (min-1)  5000 
    from S$399.90
    Min. 10 days
  34. Air hammer powerful type
    TOKU PNEUMATIC Air hammer powerful type
    Please use it instead of a mallet for cutting thin iron plates, peeling welds, removing slag, etc. Tacking work of aluminum, iron, etc., instead of a mallet, general striking work
    Material  Iron  Size  Air inlet 1 / 4PT  Shank Diameter (Φmm)  12.7  Piston Diameter (Φmm)  Φ19.0  Air Hose Inner Diameter (Φmm)  Φ6.35  Number of hits (bpm)  1600 
    from S$979.90
    Min. 4 days
  35. NPK Bishan 30400
    Nippon Pneumatic Mfg NPK Bishan 30400
    Uses a handle with rubber that is lightweight, strong, and cushions vibration. For coarsening stones * Bush hammer blade is sold separately.
    Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc3/8  No-load speed (min-1)  2500  supply air pressure (MPa)  0.6 
    from S$1,299.00
    Min. 6 days
  36. NPK Sand Ranmer Medium Lever Type 30032
    Nippon Pneumatic Mfg NPK Sand Ranmer Medium Lever Type 30032
    It is strong and has little recoil. It is a lever type. For work such as sand hardening of castings and refractory brick hardening
    Set Contents  Hose nipple, nipplestead  Hose Inner Diameter (Φmm)  12.7  Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc3/8  Piston Diameter (Φmm)  25.4  ramming area diameter (mm)  64 
    from S$1,199.00
    Min. 4 days
  37. Dowel Pin Puller (for YDP-13) hanger bolt M6X50
    YOKOTA INDUSTRIAL Dowel Pin Puller (for YDP-13) hanger bolt M6X50
    YOKOTA INDUSTRY Dowel Pimpula For, hanger bolt M6X50. Dowel pin female screw Size: For M6 Overall length: 50 mm
    Mass (g)  68 
    from S$14.99
    Min. 3 days
  38. Dowel Pin Puller (for YDP-20) hanger bolt M8X50
    YOKOTA INDUSTRIAL Dowel Pin Puller (for YDP-20) hanger bolt M8X50
    YOKOTA INDUSTRY Dowel Pimpula For, hanger bolt M8X50. Dowel pin female screw Size: For M8 Overall length: 50 mm
    Mass (g)  150 
    from S$19.99
    Min. 8 days
  39. Anti-vibration lytopic hammer corner shank
    TOKU PNEUMATIC Anti-vibration lytopic hammer corner shank
    * Operating air pressure 0.59MPa (6.0kgf / cm 2 ) is required.
    Material (Main Unit)  Iron  Shank  Square  Hose Inner Diameter (Φmm)  12.7  Air InLet  3/8PT 
    from S$1,199.00
    Min. 5 days
  40. Hammer drill
    TOKU PNEUMATIC Hammer drill
    In addition to general civil engineering construction work and construction work, it is also widely used for drilling work for chemical anchors (excluding K-10). It has a wide working range and a drilling capacity of 13 to 28 mm. (THD-1100, THD-1100AV, NRH-1) The K-10 type uses a 3/4 "tapere... Read More
    Direction of Rotation  Right 
    from S$1,499.00
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 109

Page
Set Ascending Direction