All Category

Air Chisel Scalers

An air chisel is a tool used in stripping work to remove spatter and rust from welding agents. The easy-to-grip air chisel comes standard with an air filter. High-speed hard steel wire needle chisels of 3,700 to 6,000 times per minute are available in a lineup from lightweight to powerful types. Effective even on uneven surfaces. The chisel with an air adjustment dial that is compact yet has a strong impact force is ideal for chipping concrete and removing tiles.
View : Grid List
Filter

23 Item(s)

Set Ascending Direction
  1. Needle chisel (Φ3mm × 12)
    KUKEN Needle chisel (Φ3mm × 12)
    Smooth peeling work !! Slag removal after welding Concrete / rock roughening Iron plate rust / paint removal Casting sand removal
    Air Consumption (Nm3/min)  0.15  Overall Length (mm)  210 (excluding needle)  Trusco Part No.  364-0922  Number of Needles  12  Needle Length (mm)  Φ3×125  Included Accessories  Coupling plug 20PM x 1  Hose Connection  Rc1/4  Mass (kg)  1.2 (without needle)  Air Hose Inner Diameter (Φmm)  6.5  Compressor (kW)  2.2 
    Rating:
    60%
    from S$489.90
    Min. 2 days
  2. FCH-20 Flatfish 300MML
    FUJI INDUSTRIAL TECHNIQUE FCH-20 Flatfish 300MML
    Overall Length (mm)  300  Trusco Part No.  794-5353  Blade Width (mm)  Suitable Model  FCH-20  Cutting Edge Shape  Flat 
    from S$58.99
    Min. 2 days
  3. Light needle
    IKURA SEIKI Light needle
    Lightweight and compact type. "Nigi Rakı Grip" created from the field Joint with 80% vibration cut filter: Prevents dust from entering and protects the inside of the needle. Wire blade air hose: Prevents hose elongation, residual heat during welding, and trauma such as cuts. Welding sla... Read More
    Jack Dimensions, Width W x Length L x Height H (mm)  70×290×40  Operating Pressure (MPa)  0.6  Number of Needles  Φ3 × 125 needle / 12  Mass of Main Unit (kg)  1.3  Air Consumption (m3/min)  0.08 (no load)  Number of hits (bpm [times / min])  5500 
    from S$569.90
    Min. 3 days
  4. Auto Cutter 600 (For BRH) Flat Chisel <810>
    YOKOTA INDUSTRIAL Auto Cutter 600 (For BRH) Flat Chisel <810>
    YOKOTA INDUSTRY AUTOCUTTER 600BRH_A-600 combined use, flat chisel (810). For the snap receiver, use the snap buffer D that also serves as BRH.
    Trusco Part No.  828-9366  Mass (g)  435 
    from S$29.99
    Min. 7 days
  5. Auto Cutter 600 (For BRH) Bent Chisel <818>
    YOKOTA INDUSTRIAL Auto Cutter 600 (For BRH) Bent Chisel <818>
    YOKOTA INDUSTRY AUTOCUTTER 600BRH_A-600 combined use, bent chisel (818). For the snap receiver, use the snap buffer D that also serves as BRH.
    Trusco Part No.  828-9367  Mass (g)  445 
    from S$33.99
    Min. 3 days
  6. Needle Φ3x100 (61005)
    IKURA SEIKI Needle Φ3x100 (61005)
    It is a Φ3 needle.
    Trusco Part No.  819-0296  Needle Length (mm)  125  Needle Chisel Diameter (Φmm) 
    from S$129.90
    Min. 5 days
  7. Auto Cutter 600 (For BRH) Rivet Cutting Chisel <607>
    YOKOTA INDUSTRIAL Auto Cutter 600 (For BRH) Rivet Cutting Chisel <607>
    It is a rivet cutting chisel (607) for both YOKOTA INDUSTRY auto cutter 600BRH_A-600. For the snap receiver, use the snap buffer D that also serves as BRH.
    Trusco Part No.  828-9364  Mass (g)  415 
    from S$58.99
    Min. 3 days
  8. Baby hammer square type
    FUJI INDUSTRIAL TECHNIQUE Baby hammer square type
    from S$589.90
    Min. 32 days
  9. Scaler
    YOKOTA INDUSTRIAL Scaler
    Air Pressure (MPa)  0.6  Suitable Hose Diameter (Φmm)  12.7  Mass (kg)  2.5  Hose Connection  3/8Rc  Rotation Speed at No Load (min-1[rpm])  3000  Overall Length (mm)  318  Included Accessories  Hose nipple (1 piece)  Air Consumption (L/min ANR)  Under load: 700 
    from S$779.90
    Min. 4 days
  10. Baby hammer drill round shape
    FUJI INDUSTRIAL TECHNIQUE Baby hammer drill round shape
    Trusco Part No.  810-6649 
    from S$589.90
    Min. 7 days
  11. Light needle
    IKURA SEIKI Light needle
    A vibration absorbing grip that makes the grip part easy to grip and reduces grip strength fatigue. Uses a Nigi Rakı grip. An air filter is standard equipment. Prevents foreign matter from entering the cylinder. The attached air hose uses a wire blade hose with excellent durability. For removing ... Read More
    Applicable Dimensions (mm)  (Needle) 2 × 180, 3 × 180  Air Consumption (m3/min)  0.2  Suitable Air Pressure (MPa)  0.6  Mass (kg)  2.4  Overall Length (mm)  345  Trusco Part No.  391-3333  Hose Connection  Coupler K23-PH 
    from S$699.90
    Min. 2 days
  12. Air regulator for RAK-60A
    Kyocera (formerly RYOBI power tool) Air regulator for RAK-60A
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    from S$19.99
    Min. 4 days
  13. O-ring for RAK-60A
    Kyocera (formerly RYOBI power tool) O-ring for RAK-60A
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    from S$3.29
    Min. 4 days
  14. Auto cutter
    YOKOTA INDUSTRIAL Auto cutter
    Trusco Part No.  809-4071 
    from S$589.90
    Min. 7 days
  15. Baby hammer round shape
    FUJI INDUSTRIAL TECHNIQUE Baby hammer round shape
    Trusco Part No.  810-6645 
    from S$649.90
    Min. 7 days
  16. Auto Cutter 600 (For BRH) Sheet Metal Chisel B <809>
    YOKOTA INDUSTRIAL Auto Cutter 600 (For BRH) Sheet Metal Chisel B <809>
    YOKOTA INDUSTRY AUTOCUTTER 600BRH_A-600 combined sheet metal chisel B (809). For the snap receiver, use the snap buffer D that also serves as BRH.
    Mass (g)  425  Trusco Part No.  828-9365 
    from S$89.99
    Min. 3 days
  17. Regulator bush for RAK-60A
    Kyocera (formerly RYOBI power tool) Regulator bush for RAK-60A
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    from S$11.99
    Min. 4 days
  18. 4Φ needle
    IKURA SEIKI 4Φ needle
    Air Consumption (m3/min)  0.2 (no load)  Suitable Air Pressure (MPa)  0.6  Mass (kg)  2.4  Number ofImpact (min -1 [times / min])  4000  Outer Dimensions, Width W x Length L x Height H (mm)  55×345×75  Number of Needles  Φ2 / 27 book Φ3 / 12 book 
    from S$119.90
    Min. 5 days
  19. Roll pin for RAK-60A
    Kyocera (formerly RYOBI power tool) Roll pin for RAK-60A
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    from S$8.29
    Min. 4 days
  20. Baby hammer drill round shape
    FUJI INDUSTRIAL TECHNIQUE Baby hammer drill round shape
    Trusco Part No.  810-6647 
    from S$749.90
    Min. 7 days
  21. Auto Cutter 600 (For BRH) Sheet Metal Chisel A <807>
    YOKOTA INDUSTRIAL Auto Cutter 600 (For BRH) Sheet Metal Chisel A <807>
    YOKOTA INDUSTRY AUTOCUTTER 600BRH_A-600 combined sheet metal chisel A (807). For the snap receiver, use the snap buffer D that also serves as BRH.
    Trusco Part No.  828-9363  Mass (g)  375 
    from S$77.99
    Min. 3 days
  22. Baby hammer drill square type
    FUJI INDUSTRIAL TECHNIQUE Baby hammer drill square type
    Trusco Part No.  810-6646 
    from S$749.90
    Min. 7 days
  23. Needle chisel
    KUKEN Needle chisel
    Lightweight and ideal for all peeling work. Slag removal after welding. Roughening of concrete and bedrock. Rust and paint remover on the iron plate. Sand removal for castings.
    Applicable Dimensions (mm)  (Needle) 3 × 125  Air Consumption (m3/min)  0.15  Suitable Air Pressure (MPa)  0.6  Overall Length (mm)  210  Trusco Part No.  364-0922  Number ofImpact (min -1 [times / min])  4000  Hose Connection  Rc1/4 
    Discontinued
View : Grid List
Filter

23 Item(s)

Set Ascending Direction