All Category

Grinding

Grinding is a tool that smoothly grinds the surface of objects such as metal and glass by rotating a circular grindstone. A grinder as a pneumatic tool uses compressed air for the rotational movement of a grindstone. There are various types depending on the application, such as those that can remove paint and rust, small ones such as pencil types suitable for precision polishing, engraving, and finishing work, and those that can use abrasives other than grinding stones. There is a grinder.
View : Grid List
Filter

Items 1 - 40 of 592

Set Ascending Direction
  1. Air micro grinder
    UHT (Ushio) Air micro grinder
    An ultra-lightweight model with a reinforced resin body. For metal processing, polishing, and deburring.
    Air Consumption (m3/min)  0.12~0.18  Suitable Air Pressure (MPa)  0.4~0.6  Overall Length (mm)  165  Chuck Inner Diameter (Φmm)  Trusco Part No.  360-7046  Rotation Speed at No Load (min-1[rpm])  55000  Mass (g)  78  Hose Connection  Quick joint  Exhaust direction  Rear 
    from S$299.90
    Min. 2 days
  2. Bar grinder long 75Φ
    YoshidaTools Bar grinder long 75Φ
    YOSHIDA's straight grinders (YGL-4H series) are designed to be compact, lightweight, high power and easy to use. A compactly designed cylinder and rotor are built into the aluminum body. Since the grindstone shaft is directly connected to the rotor, it is powerful with little transmission los... Read More
    Air Consumption (Nm3/min)  (Maximum) 0.75  Screw Dimensions  (Whetstone mounting) W3 / 8 mountain 16  Recommended Hose Diameter (mm)  12.7  No-load Rotation Speed (min -1 [rpm])  12000  Mass (kg)  2.5 (with whetstone cover)  Overall Length (mm)  585  Wheel Size (mm)  75×19×9.53  Handle  roll  Exhaust direction  side 
    from S$649.90
    Min. 6 days
  3. Air Micro Grinder
    MonotaRO Air Micro Grinder
    A handy type micro grinder. It can be used for deburring after processing, grinding of various metals, and surface finishing. For grinding and polishing of metals, etc. * If there is an air leak, tighten the screw on the grip body tightly before use. * Please avoid using it for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Air Hose Connection  1/4  Included Accessories  1/4 coupler  Overall Length (mm)  136  Air Consumption (L/min)  198  Mass (g)  250  Collet Size (mm)  Rotation Speed at No Load (min-1[rpm])  56000 
    Rating:
    79%
    from S$109.90
    Min. 2 days
  4. Air grinder for whetstone with shaft
    MonotaRO Air grinder for whetstone with shaft
    It is a small type grinder. The collet chuck allows you to attach a whetstone with a shaft of various shapes with a 6 mm shank. Finish grinding of small parts, etc. * Do not use for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  0.68  Overall Length (mm)  190  Rotational Speed (min -1 [rpm])  22000  Collet Size (mm)  Air Consumption (L/min)  84  Air Hose Inner Diameter (Φmm)  9.5  Type  Non-dust absorbing type  Air Hose Connection  PT1/4 
    Rating:
    75%
    from S$76.99
    Min. 2 days
  5. Air Grinder Set for Mounted Wheel
    MonotaRO Air Grinder Set for Mounted Wheel
    It is a small type grinder. The collet chuck allows you to attach a whetstone with a shaft of various shapes with a 6 mm shank. Finish grinding of small parts, etc. * Do not use for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Mass of Main Unit (kg)  0.68  Overall Length (mm)  190  Rotational Speed (min -1 [rpm])  22000  Collet Size (mm)  Suitable Hose Diameter (Φmm)  6.5  Air Consumption (L/min)  84  Air Hose Connection  PT1/4 
    Rating:
    72%
    from S$88.99
    Min. 2 days
  6. Air Grinder
    AIRREX (Anest Iwata) Air Grinder
    "AIRREX" will be Anest Iwata's DIY brand. Compact and lightweight * Hexagonal shaft is not supported.
    Mass (kg)  0.34  Maximum Operating Pressure (MPa)  0.59  Main Unit Dimensions, Length L x Width W x Height H (mm)  125×47×33  Air Consumption (L/min)  230  Rotation Speed at No Load (min-1[rpm])  25000  Collet Chuck Size (mm)  Φ3.18、6.0、6.35 
    Rating:
    90%
    from S$119.90
    Min. 2 days
  7. Air Grinder for Heavy Duty
    MonotaRO Air Grinder for Heavy Duty
    A straight grinder for heavy grinding. Since the air supply is a roll type, it is suitable for long hours of work. * Do not use for anything other than its intended purpose.
    Mass (kg)  0.62  Suitable Air Pressure (MPa)  0.62  Air Consumption (L/min)  108  Suitable Hose Diameter (Φmm)  6.5  Collet Size (mm)  Air Hose Connection  PT1/4  Rotational Speed (min -1 [rpm])  24000  Overall Length (mm)  173 
    Rating:
    70%
    from S$199.90
    Min. 2 days
  8. Air micro angle grinder for surface grinding
    MonotaRO Air micro angle grinder for surface grinding
    Can be used for surface grinding. Since there is little vibration, it is suitable for long hours of work. As the set contents are substantial, it is convenient to carry. For surface grinding * Please avoid using it for any other purpose.
    Suitable Air Pressure (MPa)  0.4~0.6  Air Consumption (L/min)  120  Overall Length (mm)  140  Mass (g)  150  Rotation Speed at No Load (min-1[rpm])  23500  wheel dimensions (mm)  30  Hose Inner Diameter (Φmm)  Connection diameter  Air: 6Φmm  Spindle  M7-P0.75 
    Rating:
    100%
    from S$289.90
    Min. 2 days
  9. Micro Air Grinder
    TRUSCO Micro Air Grinder
    An easy-to-grip ergonomically designed micro air grinder. A high-grade precision air tool with excellent durability. Compatible with 2.4 and 3.2 mm axes by using an optional collet. Deburring, chamfering, and polishing when processing various parts. Mold processing and glass processing. For light... Read More
    Air Consumption (m3/min)  0.15  Suitable Air Pressure (MPa)  0.4~0.6  Mass (g)  108  Overall Length (mm)  155  Chuck Inner Diameter (Φmm)  Trusco Part No.  301-9128  Rotation Speed at No Load (min-1[rpm])  60000 
    Rating:
    100%
    from S$289.90
    Min. 2 days
  10. For air angle grinder + mini mini + lever type + 50Φ
    MonotaRO For air angle grinder + mini mini + lever type + 50Φ
    A general 50mm whetstone can be used. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Before connecting the air hose, make sure that air is not supplied by the operating ... Read More
    Mass (kg)  0.34  Suitable Air Pressure (MPa)  0.55  Overall Length (mm)  125  Rotation Speed at No Load (min-1[rpm])  16500  Air Consumption (L/min)  260  Suitable Hose Diameter (Φmm)  Wheel Outer Diameter (Φmm)  50 (hole diameter Φ9.53)  Air Hose Connection  PT1/4 
    Rating:
    100%
    from S$179.90
    Min. 2 days
  11. Air Angle Grinder with Shaft
    MonotaRO Air Angle Grinder with Shaft
    It is a small type angle grinder. The collet chuck allows you to attach a whetstone with a shaft of various shapes with a 6 mm shank. Finish grinding of small parts, etc. * Do not use for any other purpose.
    Air Hose Connection  PT1/4  Rotational Speed (min -1 [rpm])  20000  Air Consumption (L/min)  85  Mass (kg)  0.54  Overall Length (mm)  175  Suitable Hose Diameter (Φmm)  6.5  Suitable Air Pressure (MPa)  0.62  Collet Size (mm) 
    Rating:
    73%
    from S$109.90
    Min. 2 days
  12. Air micro straight grinder for precision grinding
    MonotaRO Air micro straight grinder for precision grinding
    It can be used for deburring after processing, grinding of various metals, and surface finishing. Since there is little vibration, it is suitable for long hours of work. As the set contents are substantial, it is convenient to carry. For precision grinding * Please avoid using it for any other pu... Read More
    Suitable Air Pressure (MPa)  0.4~0.6  Air Consumption (L/min)  120  Mass (g)  130  Overall Length (mm)  165  Collet Size (mm)  Hose Inner Diameter (Φmm)  Rotation Speed at No Load (min-1[rpm])  65000  Connection diameter  Air: 6Φmm  Point Angle  Straight 
    from S$249.90
    Min. 2 days
  13. Air Disc Grinder
    VESSEL Air Disc Grinder
    A safety throttle that prevents unexpected operation. <Click lock disk system> The dedicated adapter makes it easy to replace the grindstone without using a tightening tool. It is a specification that does not exhaust the work and does not raise dust. For metal grinding / polishing, base fi... Read More
    Suitable Air Pressure (MPa)  0.6  Air Consumption (m3/min)  0.7  Mass (kg)  1.39  Rotation Speed at No Load (min-1[rpm])  13500  Overall Length (mm)  205  Trusco Part No.  253-7362  Head Height (mm)  92.2  Hose Connection  Rc1/4  Exhaust direction  Side 
    Rating:
    100%
    from S$489.90
    Min. 2 days
  14. Air micro grinder set
    MonotaRO Air micro grinder set
    It can be used for deburring after processing, grinding of various metals, and surface finishing. For grinding and polishing of metals, etc. * Do not use for any other purpose.
    Suitable Air Pressure (MPa)  0.62  Air Hose Connection  1/4  Overall Length (mm)  136  Air Consumption (L/min)  198  Mass (g)  250  Collet Size (mm)  Rotation Speed at No Load (min-1[rpm])  56000 
    Rating:
    20%
    from S$139.90
    Min. 2 days
  15. Mini angle grinder
    CUSTOR Mini angle grinder
    Mini grinder with high precision finish, quiet and high speed grinding
    Air Consumption (m3/min)  0.076  Suitable Air Pressure (MPa)  0.6  Outer Dimensions, Length L x Width W x Height H (mm)  155×65×75  Rotation Speed at No Load (min-1[rpm])  22000  Mass (g)  540  Collet diameter (Φmm)  6.0(1/4)  Suitable Hose Inner Dia. (Φmm)  6.5 or more  Air InLet  NPT1/4  Exhaust Type  Rear exhaust type  Specification  Safety lever type 
    Rating:
    100%
    from S$169.90
    Min. 2 days
  16. Air Grinder "Air Leutor"
    JTC Air Grinder "Air Leutor"
    Rotation Speed  22000RPM  Mass (kg)  0.6  Overall Length (mm)  175  Collet Size (mm) 
    from S$179.90
    Min. 2 days
  17. Micro Air Grinder
    SUPER TOOL Micro Air Grinder
    Ultra-compact / lightweight pencil type that fits your fingertips. Excellent safety and durability due to the precision-designed vane motor. Achieves high-speed precision machining with high-speed rotation and high output. Evolved in quality and performance, without misalignment, and demonstrates... Read More
    Supply Air Pressure (MPa)  0.6  Hose Connection (Air Supply Side)  Nipple R1 / 4  Exhaust Type  Rear 
    Rating:
    100%
    from S$359.90
    Min. 2 days
  18. Air grinder + mini mini
    MonotaRO Air grinder + mini mini
    It is a mini mini air grinder with a total length of 123 mm. Finish grinding of small parts, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. When connecting the air hose, take your finger off the operating lever of the air grinder. Before replacing the tip tool,... Read More
    Mass (kg)  0.3  Suitable Air Pressure (MPa)  0.55  Overall Length (mm)  123  Rotation Speed at No Load (min-1[rpm])  25000  Air Consumption (L/min)  260  Suitable Hose Diameter (Φmm)  Collet Size (mm)  Air Hose Connection  PT1/4  Included Accessories  PT1/4 coupler, dustproof rubber cap 
    Rating:
    100%
    from S$75.99
    Min. 2 days
  19. Mini Mini Angle Grinder 2in Low Profile
    MASTER AIR Mini Mini Angle Grinder 2in Low Profile
    It is a change of the head shape. The head height has been lowered, making it easier to access narrow spaces.
    Suitable Air Compressor (kw)  (3-phase 200V) Recommended 2.2 or more  Air Consumption (m3/min)  0.26  Mass (kg)  0.4  Suitable Air Pressure (MPa)  0.62  Air inlet  1/4  Overall Length (mm)  101  Rotation Speed at No Load (min-1[rpm])  16500  Wheel Diameter (Φmm)  58  Exhaust direction  Rear  Air Hose Inner Diameter (Φmm)  Recommended 4.8 or higher 
    Rating:
    100%
    from S$229.90
    Min. 2 days
  20. Mini Grinder
    CUSTOR Mini Grinder
    Mini grinder with high precision finish, quiet and high speed grinding
    Air Consumption (m3/min)  0.24  Suitable Air Pressure (MPa)  0.6  Rotation Speed at No Load (min-1[rpm])  25000  Mass (g)  360  Collet diameter (Φmm)  6.0(1/4)  Suitable Hose Inner Dia. (Φmm)  6.5 or more  Dimensions, Width W x Length L (mm)  65×152  Air InLet  NPT1/4  Exhaust Type  Rear exhaust type  Specification  Safety lever type 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  21. Die grinder 2
    YANASE Die grinder 2
    A straight grinder equipped with the latest lock system. Can be used for Φ6mm shaft tip tools.
    Air Consumption (m3/min)  0.057  Operating Pressure (MPa)  0.44~0.58  Overall Length (mm)  179  Rotational Speed (min -1 [rpm])  25000  Outer Diameter (Φmm)  43  Mass (g)  500  Collet diameter (Φmm)  Exhaust direction  Rear  Included Accessories  Spanner, coupler, regulator 
    Rating:
    100%
    from S$119.90
    Min. 2 days
  22. Air Grinder for Heavy Grinding, Long Shaft Type
    MonotaRO Air Grinder for Heavy Grinding, Long Shaft Type
    A straight grinder for heavy grinding. Since the air supply is a roll type, it is suitable for long hours of work. * Do not use for anything other than its intended purpose.
    Overall Length (mm)  345  Suitable Air Pressure (MPa)  0.62  Air Consumption (L/min)  142  Rotational Speed (min -1 [rpm])  14600  Mass (kg)  1.3  Suitable Hose Diameter (Φmm)  9.5  Collet Size (mm)  Air Hose Connection  PT3/8 
    Rating:
    100%
    from S$289.90
    Min. 2 days
  23. Micro Air Grinder (GEM New Motor)
    Muraki Micro Air Grinder (GEM New Motor)
    An ultra-lightweight 100g ergonomic grip improves work efficiency. By adopting a special air hose, 10 horn sounds are reduced compared to the conventional product. The precision-designed vane motor maintains stable performance for a long time. The ideal design of the bearing, high-grade bearings,... Read More
    Supply Air Pressure (MPa)  0.5(+0.2/-0.1)  Mass (g)  100  Overall Length (mm)  137 (excluding hose)  Air Consumption (L/min ANR)  160  Maximum Rotation Speed (min-1[rpm])  60000  Throttle Control  ON⇔OFF valve  Chucking Capacity (mm)  Φ3 
    Rating:
    100%
    from S$499.90
    Min. 2 days
  24. Baby Grinder (6mm Axis for Precision Polishing & Grinding)
    YoshidaTools Baby Grinder (6mm Axis for Precision Polishing & Grinding)
    YOSHIDA's baby grinder (YG-23 series) is a high quality product made in Japan, designed to be compact, lightweight, high power and easy to use. Since the collet is directly connected to the rotor of this machine, there is little core deviation and it rotates smoothly at high speed, reducing o... Read More
    Screw Dimensions  (Hose base) RC1 / 4  Air Consumption (Nm3/min)  (No load) 0.47  No-load Rotation Speed (min -1 [rpm])  22000  Maximum Outer Diameter (mm)  37  Collet Size (mm)  Recommended Hose Diameter (mm)  9.5  Included Accessories  Coupler plug NL-22PM 
    Rating:
    100%
    from S$249.90
    Min. 2 days
  25. Air micro angle grinder For precision grinding
    MonotaRO Air micro angle grinder For precision grinding
    It can be used for deburring after processing, grinding of various metals, and surface finishing. Since there is little vibration, it is suitable for long hours of work. As the set contents are substantial, it is convenient to carry. Since the tip is angled, please use it in a place where it is d... Read More
    Suitable Air Pressure (MPa)  0.4~0.6  Tip Angle (°)  120  Air Consumption (L/min)  120  Mass (g)  140  Overall Length (mm)  140  Collet Size (mm)  Hose Inner Diameter (Φmm)  Rotation Speed at No Load (min-1[rpm])  52500  Connection diameter  Air: 6Φmm 
    Rating:
    90%
    from S$269.90
    Min. 2 days
  26. Die Angled Grinder "Baby Angled Grinder" (50mm)
    YoshidaTools Die Angled Grinder "Baby Angled Grinder" (50mm)
    YOSHIDA's baby angle grinder (YA-2C series) is a high quality product made in Japan, designed to be compact, lightweight, high power and easy to use. lightweight. It is a compact and easy-to-hold design. It is a product with good gear durability and long lifetime. Welding surface finishing, g... Read More
    Method  (Handle) roll  Screw Dimensions  (Hose base) RC1 / 4  Air Consumption (Nm3/min)  (No load) 0.47  Maximum Peripheral Speed (m / min)  (Toys) 4300  Mass (kg)  (With toy cover) 0.645  No-load Rotation Speed (min -1 [rpm])  15000  Overall Length (mm)  156  Head Height (mm)  47  Wheel Size (mm)  50×4×9.5  Recommended Hose Diameter (mm)  9.5  Included Accessories  Coupler plug NL-22PM 
    Rating:
    100%
    from S$359.90
    Min. 2 days
  27. Small and light air grinder
    LITETEC Small and light air grinder
    Lightweight, compact and easy to handle. It is possible to grind and polish according to the application by attaching the tip parts of the Lolock mounting method. For various grinding and polishing work by attaching various tip parts of the Lolock mounting method.
    Rotation Speed at No Load (min-1[rpm])  0~16000  connector size  1/4  Pad diameter (Φmm)  50、75  Mass (g)  580  Working Air Pressure (MPa [kgf/cm2])  Mounting method  Lock type (tip parts)  Mounting Screw  M6UNF (pad)  Speed Range  Stepless 
    from S$119.90
    Min. 2 days
  28. Grinder
    URYU SEISAKU Grinder
    Trusco Part No.  211-6014  Rotation Speed at No Load (min-1[rpm])  25000 (maximum)  Collet Chuck Size (mm)  Noise Level (dB(A))  85  Recommended Hose Diameter (mm)  9.5  Mass (kg)  About 0.56 (without whetstone)  From Shaft Center to Body Side (mm)  About 17.0  Overall Length (mm)  Approximately 174 (without whetstone)  Hose Connection  PT1/4 
    Rating:
    100%
    from S$299.90
    Min. 2 days
  29. MINI MINI Angled Grinder Exclusive Grindstone
    MASTER AIR MINI MINI Angled Grinder Exclusive Grindstone
    Suitable for  2013  Abrasive Grain Size  36  Thickness (mm)  Wheel Diameter (Φmm)  58  Hole Diameter (Φmm)  9.5 
    Rating:
    20%
    from S$64.99
    Min. 2 days
  30. Air Angle Grinder For Offset Wheel / Flexible Wheel
    MonotaRO Air Angle Grinder For Offset Wheel / Flexible Wheel
    A general 100mm whetstone can be used. With a side grip that is easy to grip. It can be used for a wide range of work by changing the abrasive material. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use for any other purpose.
    Air Consumption (m3/min)  0.23  Included Accessories  1 whetstone, 1 air coupler  Mass (kg)  1.7  Wheel Size (mm)  100 (4 inches)  Rotation Speed at No Load (min-1[rpm])  11000  Hole Diameter (Φmm)  15  Overall Length (mm)  235  Exhaust direction  Forward 
    from S$289.90
    Min. 2 days
  31. Cut-off tool mini mini for 75Φ
    MonotaRO Cut-off tool mini mini for 75Φ
    As it is a mini type, it is suitable for work in narrow places. For polishing and polishing work in a narrow space * Do not use for anything other than its intended purpose.
    Specification  (Air exhaust) Rear  Air Consumption (m3/min)  0.37  Suitable Air Pressure (MPa)  0.55  Overall Length (mm)  125  Rotation Speed at No Load (min-1[rpm])  16500  Mass (g)  400  Suitable Hose Diameter (Φmm)  Air Hose Connection  PT1/4 
    from S$159.90
    Min. 2 days
  32. Micro Angle Grinder
    UHT (Ushio) Micro Angle Grinder
    Ergonomic angles 120 and 90 degrees are available. Angle type reduces unpleasant noise that tends to occur. Abundant tip tools support various applications.
    Shank  Supply Air Pressure (MPa)  0.6  Air Consumption (NL/min)  120  Switching Method  Control grip valve  Hose Fitting Size  PT 1/4  Exhaust Type  Rear 
    Rating:
    80%
    from S$489.90
    Min. 2 days
  33. Air angle grinder
    YANASE Air angle grinder
    Lightweight but high torque! Ideal for polishing and deburring spots!
    Mass (g)  530  Operating Pressure (MPa)  0.44~0.58  Rotational Speed (min -1 [rpm])  22000  Air Consumption (m3/min)  0.6  Size (mm)  (Disc) Φ58 × 10  Overall Length (mm)  140  Head Height (mm)  58  Exhaust direction  Side 
    Rating:
    100%
    from S$389.90
    Min. 2 days
  34. Baby Grinder
    FUJI INDUSTRIAL TECHNIQUE Baby Grinder
    High output, excellent durability, easy to work. A high-output and durable baby grinder suitable for detailed work. Output is 30% higher than conventional products. Easy to replace the whetstone, Uses a highly durable collet, making it ideal for grinding in various metal processes.
    Rotation Speed at No Load (min-1[rpm])  24000 
    from S$329.90
    Min. 2 days
  35. Disc Grinder
    YOKOTA INDUSTRIAL Disc Grinder
    Built-in safety throttle device
    Air Pressure (MPa)  0.6  Specification  Exhaust direction: side 
    from S$469.90
    Min. 2 days
  36. For air angle grinder + offset grindstone/flexible grindstone + roll type + 100Φ
    MonotaRO For air angle grinder + offset grindstone/flexible grindstone + roll type + 100Φ
    A general 100mm whetstone can be used. Since the air supply is a roll type, it is suitable for long hours of work. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Before ... Read More
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  1.22  Wheel Outer Diameter (Φmm)  100  Rotation Speed at No Load (min-1[rpm])  15000  Overall Length (mm)  186  Suitable Hose Diameter (Φmm)  9.5  Air Consumption (L/min)  95  Air Hose Connection  PT1/4 
    Rating:
    100%
    from S$329.90
    Min. 2 days
  37. Mini 3" Angle Air Cut-Off Tool Low Profile
    MASTER AIR Mini 3" Angle Air Cut-Off Tool Low Profile
    The head height has been lowered, making it easier to access narrow spaces.
    Air Consumption (m3/min)  0.26  Mass (kg)  0.4  Overall Length (mm)  101  Rotation Speed at No Load (min-1[rpm])  16500  compressor  3-phase 200V 2.2kW or more  Suitable Air Pressure (kPa)  620(0.62Mpa)  Recommended Hose Diameter (mm)  Inner diameter 4.8 or more  Exhaust direction  Rear 
    Rating:
    100%
    from S$199.90
    Min. 2 days
  38. Micro Hand Tool
    UHT (Ushio) Micro Hand Tool
    A 17mm, dodecagonal body that fits perfectly in your hand. Precise and quick finish. It is powerful without feeling vibration or heat generation. You won't get tired even if you work for a long time. For precision grinding and polishing work
    Suitable Air Pressure (MPa)  0.4  Air Consumption (NL/min)  120  Mass of Main Unit (g)  130  Overall Length (mm)  143  Shank  3mm  Maximum Rotation Speed (min-1[rpm])  65000  Switching Method  Control grip valve  Hose Fitting Size  PT 1/4  Exhaust Type  Rear  Type  Straight type 
    Rating:
    100%
    from S$479.90
    Min. 2 days
  39. Mini Mini Angle Die Grinder Low Profile
    MASTER AIR Mini Mini Angle Die Grinder Low Profile
    It is a change of the head shape. The head height has been lowered, making it easier to access narrow spaces. It is used by attaching a whetstone with a shaft or a polishing tool with a shaft such as a carbide bar. A small palm-sized air tool. Even women can use it easily.
    Suitable Air Compressor (kw)  (3-phase 200V) Recommended 2.2 or more  Air Consumption (m3/min)  0.26  Mass (kg)  0.3  Suitable Air Pressure (MPa)  0.62  Air inlet  1/4  Overall Length (mm)  110  Rotation Speed at No Load (min-1[rpm])  19000  Collet Size (mm)  Suitable Collet  6mm、3mm、1/4、1/8  Exhaust Type  Rear exhaust  Air Hose Inner Diameter (Φmm)  Recommended 4.8 or higher 
    from S$169.90
    Min. 2 days
  40. Air angle grinder + offset whetstone/flexible whetstone + roll type + 50Φ
    MonotaRO Air angle grinder + offset whetstone/flexible whetstone + roll type + 50Φ
    A general 50mm whetstone can be used. Since the air supply is a roll type, it is suitable for long hours of work. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Before c... Read More
    Suitable Air Pressure (MPa)  0.62  Mass (kg)  0.64  Rotation Speed at No Load (min-1[rpm])  15000  Overall Length (mm)  160  Wheel Outer Diameter (Φmm)  50  Air Consumption (L/min)  79  Suitable Hose Diameter (Φmm)  9.5  Air Hose Connection  PT1/4 
    from S$269.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 592

Set Ascending Direction