All Category

Air Bevelers

Metal processing is a processing technology applied to make parts and products from metal. It can be said that metal processing is indispensable for manufacturing, such as products made from processed metal itself, and plastic materials born from molds made by metal processing. There are various metal processing techniques such as cutting, polishing and cutting metal. “Chamfering”, in which chamfering is applied to the edges of steel plates using pneumatic pressure, is another metal processing technology.
View : Grid List
Filter

23 Item(s)

Set Ascending Direction
  1. Vertical beveler high output type
    SP AIR Vertical beveler high output type
    A powerful type with smooth chamfering of C5. A chip that can be used with the SP-1251BV is also attached.
    Specification  Compliant with PSPC standards  2018 Trusco page  5 0576  Overall Length (mm)  340  Suitable Air Pressure (MPa)  0.62  Mass (kg)  3.2  Trusco Part No.  829-2420  Chamfering Capacity  Up to 5C  chamfer angle (°)  45 
    from S$1,999.00
    Min. 6 days
  2. R face small diameter beveler
    SP AIR R face small diameter beveler
    The minimum machined hole diameter is 6.8 mm. Ideal for chamfering and deburring small diameter bolt holes and long holes. The tip can be used 3 times at different angles. The chip is cooled by the cooling air system, and the durability is improved.
    Air Consumption (m3/min)  0.2  Mass (kg)  0.4  Suitable Air Pressure (MPa)  0.6  Chamfering Capacity  1.5R  Overall Length (mm)  112  Rotation Speed at No Load (min-1[rpm])  23000  Trusco Part No.  541-5225  Hose Connection  NPT1/4 
    from S$599.90
    Min. 4 days
  3. Air pipe groove processing machine
    FUJI INDUSTRIAL TECHNIQUE Air pipe groove processing machine
    from S$9,599.00
    Min. 7 days
  4. Hanchanman
    FUJIGEN KOGYO Hanchanman
    Lightweight and handy type, chamfering from thread surface to C4 is possible. It is lightweight. For edge chamfering, chamfering * Tips are sold separately.
    Air Consumption (m3/min)  0.19  Suitable Air Pressure (MPa)  0.49~0.68  Rotation Speed at No Load (min-1[rpm])  10000  Overall Length (mm)  170 、 [Safety board] 150  Mass (kg)  Number of Tips  Blade Shape  3 blades  Trusco Part No.  382-3431  chamfer angle (°)  45  Set Contents  Clamp screw, wrench, mini oil  Hose Connection  Rc1/4  Suitable Tip  SDMW type or SDEW type  Material  Steel  Chamfering Capacity  Thread surface ~ C4 
    from S$1,799.00
    Min. 3 days
  5. Beveler C2-C7 type
    SHINANO Beveler C2-C7 type
    The chip is cooled directly with air, the temperature rise rate is reduced by about half, and the chip lasts longer. It also cools the spindle from the inside. By turning the handle, you can change the air exhaust to a position that does not interfere with your work. Push the dial and turn it cou... Read More
    Air Consumption (m3/min)  0.96  Air Connection (inch)  1/4  Rotation Speed at No Load (min-1[rpm])  10000  Overall Length (mm)  250  Number of Tips  Mass (kg)  3.36  Exhaust direction  360 degrees  Noise Level (dB(A))  96.3 
    from S$1,999.00
    Min. 6 days
  6. Pipe groove processing machine
    FUJI INDUSTRIAL TECHNIQUE Pipe groove processing machine
    Grooving machines for pipe welding are small, lightweight and powerful. Workability is good by adopting a pipe inner diameter chucking mechanism, and the pipe is grooved. Since it has a built-in reaction force receiver, there is no reaction during cutting. Used for pipe grooves (flat, outer, inner)
    Suitable Air Pressure (MPa)  0.63  Type  Built-in reaction force receiving type  Exhaust direction  Rear 
    from S$5,599.00
    Min. 7 days
  7. Lightweight beveler
    SHINANO Lightweight beveler
    A swivel type deflector with a new mechanism is equipped as standard, greatly improving the work surface.
    Plate dimensions (Φmm)  150  Type  No hole 
    from S$1,299.00
    Min. 6 days
  8. C surface small diameter beveler
    SP AIR C surface small diameter beveler
    The minimum machined hole diameter is 6.8 mm. Ideal for chamfering and deburring small diameter bolt holes and long holes. The tip can be used 3 times at different angles. The chip is cooled by the cooling air system, and the durability is improved.
    Air Consumption (m3/min)  0.2  Mass (kg)  0.4  Suitable Air Pressure (MPa)  0.6  Chamfering Capacity  1.5C  Overall Length (mm)  112  Rotation Speed at No Load (min-1[rpm])  23000  chamfer angle (°)  45  Trusco Part No.  541-5217  Hose Connection  NPT1/4 
    from S$599.90
    Min. 3 days
  9. Vertical beveler
    SP AIR Vertical beveler
    The blade lasts a long time because the angle of the blade can be changed 8 times with the original 8-sided tip. It is a 3-flute cutter blade. 4R and 4C chips are 4-sided chips.
    Suitable Air Pressure (MPa)  0.62  Air Consumption (L/min)  0.9  Chamfering Capacity  1~4C、2.5R、3.5R、4R  Mass (kg)  2.8  Overall Length (mm)  340  chamfer angle (°)  45  Rotation Speed at No Load (min-1[rpm])  7500  Trusco Part No.  794-8719  Air Intake  NPT1/4  Blade Shape  Others  Conform to  PSPC standard 
    from S$1,299.00
    Min. 6 days
  10. Hanchanman resin guide plate screw
    FUJIGEN KOGYO Hanchanman resin guide plate screw
    Mass (g)  1.4  Trusco Part No.  796-4722  Specification  Resin guide plate screw  Material  Steel 
    from S$9.79
    Min. 32 days
  11. Mini Hanchan
    FUJIGEN KOGYO Mini Hanchan
    Lightweight type that can be chamfered from thread surface to C1.5 For chamfering from thread surface to C1.5. * Tips are sold separately
    Trusco Part No.  125-6719 
    from S$979.90
    Min. 3 days
  12. Beveler R3 C3 type
    SHINANO Beveler R3 C3 type
    The chip is cooled directly with air, the temperature rise rate is reduced by about half, and the chip lasts longer. It also cools the spindle from the inside. By turning the handle, you can change the air exhaust to a position that does not interfere with your work. Push the dial and turn it cou... Read More
    Air Consumption (m3/min)  0.96  Air Connection (inch)  1/4  Rotation Speed at No Load (min-1[rpm])  10000  Overall Length (mm)  250  Number of Tips  Mass (kg)  3.36  Exhaust direction  360 degrees  Noise Level (dB(A))  96.3 
    from S$1,599.00
    Min. 6 days
  13. Lightweight beveler
    SHINANO Lightweight beveler
    A swivel type deflector with a new mechanism is equipped as standard, greatly improving the work surface.
    Plate dimensions (Φmm)  125  Type  With holes 
    from S$1,299.00
    Min. 6 days
  14. Lightweight beveler
    SHINANO Lightweight beveler
    A swivel type deflector with a new mechanism is equipped as standard, greatly improving the work surface.
    Plate dimensions (Φmm)  125  Type  No hole 
    from S$1,299.00
    Min. 6 days
  15. Angled electric high-frequency chamfering beveler
    SP AIR Angled electric high-frequency chamfering beveler
    Even if a load is applied, the rotation speed does not drop and chamfering is possible with a light pressing force. Since it does not have a commutator, there is no need to replace the brush and it has excellent durability. Various work can be done by changing the tip and guide roller. For chamfe... Read More
    2018 Trusco page  5 0279  Mass (kg)  5.5  Trusco Part No.  829-2422  Blade Shape  Others 
    from S$4,999.00
    Min. 6 days
  16. High frequency powerful chamfer beveler
    SP AIR High frequency powerful chamfer beveler
    Even if a load is applied, the rotation speed does not drop and chamfering is possible with a light pressing force. Since it does not have a commutator, there is no need to replace the brush and it has excellent durability. A 3.5R tip and a guide roller for 3.5R are attached as standard. Various ... Read More
    Power Cable (m)  0.3  Height (mm)  130  Power Consumption (W)  1400  Width (mm)  150  Chamfering Capacity  3.5R, [Stainless steel] 5C  Overall Length (mm)  320  Mass (kg)  4.2  Chamfer Angle  450 (30 ° for 250BV-30 chip)  Rated Current (A)  Trusco Part No.  794-8735  Rotation Speed at No Load (min-1[rpm])  8000  Structure  Anti-vibration  Blade Shape  Others  Power Input (V)  Three-phase AC 200 
    from S$3,599.00
    Min. 6 days
  17. Hanchanman R
    FUJIGEN KOGYO Hanchanman R
    Lightweight and handy type, it can be processed up to R3 (C3). Edge chamfering, R, C chamfering * Tips are sold separately.
    Air Consumption (m3/min)  0.19  Suitable Air Pressure (MPa)  0.49~0.68  Mass (kg)  1.3  Rotation Speed at No Load (min-1[rpm])  10000  Overall Length (mm)  145  Number of Tips  Blade Shape  3 blades  chamfer angle (°)  45  Trusco Part No.  796-4731  Set Contents  Clamp screw, wrench, mini oil  Hose Connection  Rc1/4  Suitable Tip  SDMW type or SDEW type  Material  Steel  Chamfering Capacity  Up to R3 
    from S$1,999.00
    Min. 32 days
  18. For air beveler + soft iron / aluminum
    SP AIR For air beveler + soft iron / aluminum
    Air cooling system (patent registered). Exhaust prevents the adhesion of cutting chips. Cutter unit (patent registered). Since it is cut with three cutters, it is stable and fast, and wear is reduced compared to other companies' two-sheet type. Throttle switch suitable for continuous work. Co... Read More
    Groove Depth (mm)  (Minimum) 11  Workpiece hole diameter (mm)  (Minimum) 35  Air Consumption (m3/min)  0.6  Hose Fitting  1/4 NPT  Overall Length (mm)  280  Mass (kg)  3.2  Minimum thickness (mm)  Rotation Speed at No Load (min-1[rpm])  9000  Applicable Steel Materials  Aluminum, soft iron  Chamfering Capacity  R3.5mm 
    from S$1,299.00
    Min. 6 days
  19. Handy chamfering machine
    FUJI INDUSTRIAL TECHNIQUE Handy chamfering machine
    Height (mm)  (From the bottom) 144  Air Consumption (m3/min)  1.2  Rotation Speed at No Load (min-1[rpm])  10000  Mass (kg)  3.60  Hose Connection  3/8PT  Handle Type  roll 
    Discontinued
  20. Air beveler
    SP AIR Air beveler
    Eight chips can be used for a long time. For R chamfering work at shipyards.
    Air Consumption (m3/min)  0.6  Suitable Air Pressure (MPa)  0.62  Rotation Speed at No Load (min-1[rpm])  11000  Chamfering Capacity  2.5R  Mass (kg)  2.9  Overall Length (mm)  270  Trusco Part No.  363-0676  Hose Connection  NPT1/4 
    Discontinued
  21. Hanchanman
    FUJIGEN KOGYO Hanchanman
    Chamfering from thread surface to C4 is possible. It is lightweight (about 2 kg). For chamfering edges.
    Overall Length (mm)  (Information board) 150  Air Consumption (m3/min)  0.19  Suitable Air Pressure (MPa)  0.49~0.68  Rotation Speed at No Load (min-1[rpm])  10000  Number of Tips  Trusco Part No.  382-3431  Chamfer Angle  45 degrees  Hose Connection  Rc1/4  Suitable Tip  SDMW type or SDEW type  Chamfering Capacity  Thread surface ~ C4 
    Discontinued
  22. Hanchanman
    FUJIGEN KOGYO Hanchanman
    An air-driven handy type chamfering machine. For chamfering edges.
    Air Consumption (m3/min)  0.19  Suitable Air Pressure (MPa)  0.49~0.68  Rotation Speed at No Load (min-1[rpm])  10000  Overall Length (mm)  170  Mass (kg)  Trusco Part No.  352-9177  Chamfer Angle  45°  Hose Connection  Rc1/4  Chamfering Capacity  Thread surface ~ C4 
    Discontinued
  23. Hanchanman R-HYPER
    FUJIGEN KOGYO Hanchanman R-HYPER
    Lightweight and handy type that can be processed. For chamfering and edge chamfering * Tips are sold separately.
    Suitable Air Pressure (MPa)  0.49~0.68  Air Consumption (L/min)  0.96  Rotation Speed at No Load (min-1[rpm])  10000  Overall Length (mm)  284  Number of Tips  Blade Shape  3 blades  chamfer angle (°)  45  Suitable Tip  N43GXR type or N43MOZ, N43GUR type  Air Intake  Rc1/4  Material  Steel 
    Discontinued
View : Grid List
Filter

23 Item(s)

Set Ascending Direction