Disassemble by removing the set screw of 6P outlet
On 2016-03-31 08:25:39
The screwdriver is used to disassemble and disassemble the 6P socket setscrew and change it to the length of easy-to-use cord. For existing lengths of 1 m and 2 m, make it the proper length when there is not enough or the length is insufficient.
For replacing the power cord of the table tap. I bought it. The screw size is as per the standard, but the mounting hole on the table tap side is only 6 mm in outer dimensions and the driver shaft diameter is 7 mm, so it is necessary to widen the mounting hole by drilling and it took time to replace. = Does the driver side shaft diameter become thinner 1