The reviews are automatic translation.
Band saw shaft holder
On 2019-08-20 14:50:24
For now, there are no special issues, but other products
There is something that I want to know the original usage,
Can you ask questions?
On 2019-07-08 07:44:32
Because parts of foreign cars are expensive, I bought the same washers. It is not inferior to genuine parts. The specifications are abundant and I always buy it.
Bicycle basket attached
On 2019-04-29 21:20:14
Plating is important but I am satisfied for the moment. In some cases, I also consider Sten.
On the bike, in the car
On 2019-03-20 20:52:31
As it is 0.5 mm thick, it was purchased as a spacer for the drive part. I have not been able to have such a thin round washer until now. I think this is useful.
On 2019-03-06 15:13:12
Despite being cheap, the dimensions were accurate, and there were no burrs, and the feeling in use was good.
When driving truss bis into plywood
On 2019-03-03 18:08:44
When I attached the caster to the board, I was concerned that the screw's head would get in because the screw hole on the caster was large and I bought it.
It's thick and firm, it's full and it's in use.
For replacing old washers and bolts of European cars.
On 2019-03-02 12:52:04
If Julia also continues riding for 25 years, replacement of washers and bolts is necessary, but I was troubled to find a round washer of M6x18φ, but I found out to replace it by accident, but the appearance was renewed and I am very satisfied.
To prevent scratches by garage jack
On 2019-01-27 19:08:29
21 x 45 x 4.5 size. Work so that the car side is not scratched when raising the car body with a hydraulic garage jack. If two of the three washers and two rubber plates with a diameter of 50 mm and 10 mm sold here are stacked and set, the rubber will hit the vehicle and no flaws will occur. It is cheaper than the plastic jack adapter and the height may be kept low.
I used it as a shim
On 2019-01-05 10:20:08
I was looking for things with a thickness and it was saved because there were lots of sizes.
As a mounting washer for a track fender
On 2018-12-29 08:30:11
The thickness is also sufficient and there is no problem as goods. I am sorry because the special size is not sold near the middle.