The reviews are automatic translation.
On 2019-02-28 17:49:06
As it is available immediately, we use for various work, but is cheap and is convenient
On 2018-08-04 19:42:38
Used for flange joint. Price, quality is good. I am saved because it is rich in size.
Maintain the foreign-made speaker with the inch screw
On 2018-06-02 14:52:52
Especially because it is a product without inconvenience it was safe to use it.
Used for bicycle center stand
On 2018-05-10 22:43:25
It is a stand (W Leg etc.) to be attached to the center of many bicycles sold, but for a bicycle not equipped with a stand for the stand, it is necessary to pinch the frame with the metal fittings included. But every manufacturer does not reach the bottom with bolts of about 50 mm, so we solved the problem using 60 mm bolts this time, stainless steel is also better.
Because the fixing screw knob was small and it was hard to fix, I combined this screw and the change knob
On 2018-03-20 15:00:42
There was play in the size of the screw knob's screw head and the size of the screw head, so we improved it with vinyl tape.
As a part of homemade camera fixing jig and pan head fixing jig
On 2017-12-29 17:06:31
It has rigidity and good appearance. Is the unit price a little lower?
Parts of foreign special machinery equipment related to chemical plants
On 2017-09-15 15:17:05
A 1/4-inch wit screw can select a 5 mm step up to 75 mm long. Moreover, there are not many shops that can be purchased in units of two. The same price as Japanese screws! It can also be used for inches unified female holes.
Screw for camera head
On 2017-04-15 20:49:03
I used it as the material of the screw for camera head. Use it when the tripod set screw length is insufficient.
For machinery and equipment made in the USA
On 2017-02-13 16:23:43
In the countryside it is saved because it is difficult to obtain a few inch standard screws
Installation of foreign parts
On 2017-01-11 11:47:52
In the home center etc. I did not find the size of the child and I bought it There is no problem in obtaining