The reviews are automatic translation.
For roughing and finishing work during machining
On 2020-01-24 20:55:18
For the price, it cuts quite well and lasts for a while. It is fully compatible with processing that requires a system. Anyway, it is attractive that it is cheap.
Additional jig for resin
On 2020-01-24 17:15:49
It was too sharp to use. I set it on a lathe, but with just a slight push, I can cut the resin meat. I stopped because it was too dangerous.
Production of radio control parts
On 2019-12-12 14:42:51
I usually process aluminum material A2017, but this time I tried processing SUS.
At the beginning of use, there is no burr and the sharpness is good.
I do not know how durable it is, but there is no problem at present.
On 2019-11-19 14:18:35
I use it as a trimmer blade. It is very useful because it has good sharpness and digs with depth.
In the work of the router
On 2019-10-12 15:28:58
It is a tool that can be used for the price.
We purchase with monotarou
On 2019-09-20 19:33:12
It is a reliable product that you always buy. Also buy.
Model production with a small milling machine
On 2019-09-17 21:20:53
I used it for almost a day, but the sharpness did not drop. Although it is a hobby level to the last, I think that it is excellent in cost performance.
One-off parts production required for motorcycle remodeling
On 2019-09-17 16:39:02
The traces of the blades are clean, and there is little vibration during cutting, so it is not even about making one-off parts made by cutting duralumin. I do not know the durability in mass production, but if you think about the price, you can feel free to make a new one.
Brass sheet processing
On 2019-08-30 18:05:13
Used for cutting the sides of brass sheets. Excellent sharpness. I will do this next time
Removal of broken bolt
On 2019-06-20 14:46:26
We purchased to cut and flatten the cross section of the bolt which was broken and left in the screw hole. After flattening, I made a drill with a drill and thought that I would take out the broken bolt by removing the broken bolt.
However, because the broken bolt was actually a hardening bolt, it did not cut well.
In the end, I turned the drill in reverse and turned it to Chunchon. I got a good head, so I succeeded in taking it out with Nidzaurus. Of course I did it while spraying a lot of high penetration CRC of moth.