The reviews are automatic translation.
On 2019-08-15 08:17:54
We purchased to adjust position when we fixed mirror. There is no problem, but there should be something thinner.
At the time of prototyping
On 2019-07-24 15:24:11
It is easy to use if there is a black oxide film of the same size.
During maintenance of the machine
On 2019-03-31 11:33:07
The large diameter SS nut is not available at home centers. I came in a few days. Thank you. I'd like you to set 4 or 6 or 8 instead of just 3 pieces. I reduced my feelings.
At the time of model assembly
On 2019-02-27 22:30:46
The finish was good too and I was very happy to work smoothly.
Reinforcement at the time of weekly Robi production
On 2019-02-25 18:06:18
When manufacturing the robi, I fix it with M2 bis at the connection of the neck and the body, but because the body is plastic, there is concern that it is only a screw, and it was used as a reinforcement of the bis and the body connection. It is possible to fix firmly and relieve.
Bolting in a small gap
On 2019-01-27 18:55:11
It was solid and could be used without any problems. There was no such thing as Bali.
Useful for tightening the double nut.
On 2019-01-08 20:49:35
The thickness is thin, the price is reasonable.
Purchase to tighten with double nut.
Tightening of screw with narrow clearance
On 2018-09-21 17:01:09
It is handy because you can tighten the screw in a place where the hand does not enter the machine.
Fixation of motorcycle parts
On 2018-09-03 21:43:21
It is a repeater.
I used this item because the cheap stainless steel screw shop went bankrupt so far, but I am very satisfied with the quality and price as well.
On 2018-07-30 20:10:35
Thanks to this I was able to do the repair that I imagined.
It is perfect without the trouble of the nut itself.
It is quite expensive, but I think that it is a good commodity though it does not become quite easy in DIY because there are many quantities.
Used for ball links
On 2018-04-10 18:31:01
The monotaro with three stain nuts is easy to get!
On 2017-10-10 16:06:40
I was looking for a thin thing, so it was just good quality for lock adjustment loosening prevention.
Three kinds of nuts are thin like installation of accessories and lack of space on the back side.
On 2017-05-29 18:49:14
Even if it is thin, it can be mounted securely, it is effective for tightening in places where no strength is required more than necessary. There is no particular improvement.
Motoku action cam switch Used for operating stay (self made)
On 2016-10-28 14:34:44
For tightening the square round head bolt. Uses as expected! There are a lot of surplus.
On 2016-10-09 21:23:00
I felt the finish was not very good overall. There were also some bolts entering badly. Is the production China?
On 2016-06-24 17:58:13
It was used for remodeling the rear suspension, it was just fine and it was nice.
It is used to attach a transparent polycarbonate plate to the snowplow board. I will remove it in the spring.
On 2016-06-16 20:24:22
For each size, modularization of common parts is solid and it is very easy to choose.
I will use it for repairing bags and casters.
On 2016-04-19 16:31:31
The frequency of use of M5 size is small, but stainless steel has strong strength and is strong against rust, so we are using here.
On 2016-04-05 02:58:44
Motorcycle Parts Installation
On 2015-10-20 16:54:32
It was very good.