Buy more than* S$200* and get FREE SHIPPING

Grinder

Sort by:
Showing 1 - 30 of 305 Results
Show: 30 60 90
VIEW: Grid View List View
Micro Hand Tool
UHT
5.00(1)
409.99 SGD
ADD TO CART
Set Contents: Msg-3BSN body-10 phi with wheel 1 / 13 with a phi shaft Nyusofu2 strap-25 phi foil-Nyusofu trap (# 240, # 320, # 400, # 600, # 800, 1000, 1500 1 of each), with Stepin, spanner 1 each, air hose (1.5 m) 1 book ,over hose , filter 1 internal hose joint, case, Overall Length (mm): 143, Type: Straight type, Maximum Rotation Speed (min-1[r. p.m]): 65000, Switching Method: Grip control valve, Body Weight (g): 130, Air Consumption (NL/min): 120, Exhaust System: Backwards, Shank Axis: 3mm, Hose Connection Diameter: PT 1/4, Supply Air Pressure (kgf/cm3): 6+/-1, Purpose: For precise grinding and polishing job
Category Grinder > Micro Grinder
Mini Grinder
CUSTOR
4.00(2)
81.99 SGD
ADD TO CART
Specification: Safety lever system, Weight (g): 360, No Load Rotation Speed (min-1[r.p.m]): 25000, Hose Inner-Diameter (phi mm): More than 6.5, Dimensions (Width x Length) (mm): 65x152, Air Consumption (m2/min): 0.24, Air Inlet: NPT1/4, Exhaust System: Rear exhaust-, Compatible Air Pressure: recommended 6.3 (90 psig), Collet Diameter (phimm): 6.0(1/4)
Category Grinder > Micro Grinder
Micro Air Grinder
TRUSCO
5.00(1)
259.99 SGD
ADD TO CART
Specification: Hose inlet/One touch P plug, exhaust method/backward, TRUSCO Part Number: 301-9128, Overall Length (mm): 155, Weight (g): 108, No Load Rotation Speed (min-1[r.p.m]): 60000, Chuck Bore (phi mm): 3, Working Pressure (MPa): 0.4 to 0.6, Air Consumption (m3/min): 0.15
Category Grinder > Micro Grinder
Micro Angle Grinder
UHT
409.99 SGD
ADD TO CART
Application: For precise grinding and polishing job, Overall Length (mm): 107, Height (mm): 78, Type: 120 degree angle type, Maximum Rotation Speed (min-1[r. p.m]): 52500, Switching Method: Grip control valve, Body Weight (g): 140, Supply Air Pressure (MPa): 0.6, Air Consumption (NL/min): 120, Exhaust System: Backwards, Shank Axis: 3mm, Hose Connection Diameter: PT 1/4
Category Grinder > Angle Grinders
Grinder
URYU SEISAKU
259.99 SGD
ADD TO CART
Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut), TRUSCO Part Number: 211-6006, Overall Length (mm): About 164 (with no whetstone), Weight (kg): About 0.54 (with no whetstone), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), Collet Chuck Dimensions (mm): 6, Length from Shaft to Side (mm): About 17.0, Hose Mouthpiece Mounting Screw: PT1/4, Recommended Hose Diameter (mm): 9.5, Noise Level (dB(A)): 85
Category Grinder > Straight Grinder
Micro Air Grinder
Super Tool
5.00(1)
309.99 - 409.99 SGD
Supply Air Pressure (MPa): 0.6, Exhaust System: Backward
Category Grinder > Micro Grinder
Micro Air Grinder GEM NEW MOTOR
Gem
5.00(1)
369.99 SGD
ADD TO CART
Accessories: Collet (phi 3) / 1 piece Air hose phi5.8 (inner diameter) x phi8.5 (outer diameter) x 1.5 m (length)/1 piece Exhaust hose 0.5m (length) 1 piece Box spanner, (6mm)/1 piece Grip wrench, (8 mm)/1 piece Mule, sleep (phi 20 mm)/1 piece Tool box/1 piece, Overall Length (mm): 137 (Without hose), Weight (g): 100, Maximum Rotation Speed (min-1[r. p.m]): 60000, Chucking Ability (mm): phi3, Throttle System: ON-OFF VALVE, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Air Consumption (L/minANR): 160, Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish.
Category Grinder > Micro Grinder
Air Angle Grinder
YANASE
5.00(1)
269.99 SGD
ADD TO CART
Accessories: TOP minidisk #40, #60, #120 1 each regulator, coupler, replacement wrench, Allen wrench, each one, Overall Length (mm): 140, Weight (g): 530, Revolution (min-1[r.p.m]): 22000, Working Pressure (MPa): 0.44 - 0.58, Air Consumption (m3/min): 0.6, Size (mm): (Disk) phi58x10, Exhaust Direction: Side
Category Grinder > Angle Grinders
Mini Angle Grinder
CUSTOR
5.00(2)
119.99 SGD
ADD TO CART
Specification: Safety lever system, Weight (g): 540, No Load Rotation Speed (min-1[r.p.m]): 22000, Hose Inner-Diameter (phi mm): More than 6.5, Outer Dimensions (Length L x Width W x Height H) (mm): 155x65x75, Air Consumption (m2/min): 0.24, Air Inlet: NPT1/4, Exhaust System: Rear exhaust-, Compatible Air Pressure: recommended 6.3 (90 psig), Collet Diameter (phimm): 6.0(1/4)
Category Grinder > Angle Grinders
Micro Angle Grinder
UHT
4.00(1)
409.99 - 419.99 SGD
Application: For smoothness grinding and polishing work, Switching Method: Grip control valve, Supply Air Pressure (MPa): 0.6, Air Consumption (NL/min): 120, Hose Connection Diameter: PT 1/4
Category Grinder > Angle Grinders
Micro Air Grinder, Mach Motor,
Gem
359.99 SGD
ADD TO CART
Accessories: air hose diameter phi5.8 (inner diameter) x phi8.5 mm (outer diameter) x 1.5 m (length) / 1 piece Exhaust hose / 1 piece Pintor (phi3 mm) / 1 piece Open ended wrench (for 8 mm for) / 1 piece, Overall Length (mm): 144, Weight (g): 140, Maximum Rotation Speed (min-1[r. p.m]): 60000, Chucking Ability (mm): phi3, Throttle System: ON-OFF VALVE, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Air Consumption (L/minANR): 180, Hose Connection Port (air source side): R1/4, Exhaust System: Back, Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish.
Category Grinder > Micro Grinder
Grinder
URYU SEISAKU
5.00(1)
269.99 SGD
ADD TO CART
Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut), TRUSCO Part Number: 211-6014, Overall Length (mm): About 174 (with no whetstone), Weight (kg): About 0.56 (with no whetstone), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), Collet Chuck Dimensions (mm): 6, Length from Shaft to Side (mm): About 17.0, Hose Mouthpiece Mounting Screw: PT1/4, Recommended Hose Diameter (mm): 9.5, Noise Level (dB(A)): 85
Category Grinder > Straight Grinder
Air Micro Grinder
NITTO KOHKI
409.99 SGD
ADD TO CART
Accessories: Wheel grinder: 5x13x3mmx1 this spanner: 7x9mmx2 this coupler: HA-65SNx1 pieces, Specification: Wiht rotation speed adjuster, TRUSCO Part Number: 116-6191, Type: Pneumatic micro grinder, Overall Length (mm): 128.5, Weight (kg): 0.25, No Load Rotation Speed (min-1[r.p.m]): 56500, Air Consumption (m3/min): 0.17, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 3, 2014 TRUSCO Published Page: 2-1542
Category Grinder > Micro Grinder
Marking Pen
WEN
539.99 SGD
ADD TO CART
Type: Pneumatic, Weight (g): 170, Air Consumption (m3/min): 0.025, Body Size (phi mm): 17.3, Frequency: 500-600 strokes per minute, Unit Length (mm): 160, Using Air Pressure (kg/cm2): 4 to 7, Purpose: Engraving on various metals and glass. Make groove to remove broken tap. To remove sand and dust enter in complex places such as small casting hole etc.
Category Grinder > Micro Grinder
Midget Grinder
YOKOTA INDUSTRIAL
239.99 - 259.99 SGD
Accessories: Spanner (two), touch joint (1), Specification: Exhaust direction: forward, Air Pressure (MPa): 0.6, Hose Mouthpiece Mounting Screw: 1/4Rc, Use Hose Diameter (mm): 9.5, 2014 TRUSCO Published Page: 2-1551
Category Grinder > Straight Grinder
6mm Air Die Grinder
ESCO
4.25(4)
59.99 SGD
ADD TO CART
ESCO Part Number: EA159DN-2, Overall Length (mm): 155, Weight (g): 380, Chuck Dimension (inch): 1/4(6mm), Working Pressure (MPa): 0.64, Maximum Speed (min-1[r. p.m]): 25000, Air Consumption (L/min): 228, Indispensability Compressor (kw): 1.5 to 2.2, Suction Port Size: 1/4inchPT
Category Grinder > Straight Grinder
Air Grinder
ANEST IWATA CAMPBELL
4.50(6)
98.99 SGD
ADD TO CART
Weight (kg): 0.34, No Load Rotation Speed (min-1[r.p.m]): 25000, Body Dimensions (Length x Width x Height) (mm): 125x47x33, Air Consumption (L/min): 230, Maximum Working Pressure (MPa): 0.59, Collet Chuck Dimensions (mm): phi3.18, 6.0, 6.35
Category Grinder > Straight Grinder
Grinding Stone for Mini Mini Angle Grinder
MASTER AIR
56.99 SGD
ADD TO CART
Compatible: 2013, Grinding Wheel Diameter (phi mm): 50
Category Grinder > Angle Grinders
Air Angle Grinder, 50mm
YoshidaTools
5.00(3)
279.99 SGD
ADD TO CART
Accessories: Coupler plug NL-22PM, Overall Length (mm): 156, Weight (kg): (Toishikaba with) 0.645, Maximum Peripheral Velocity (m/min): (Wheels) 4300, System: (Handle) roll, Screw Dimensions: (Air inlet) RC1 / 4, Grinding Wheel Dimensions (mm): 50x4x9.5, Rolling Speed of No-load (min-1[r.p.m]): 15000, Recommended Hose Diameter (mm): 9.5, Air Consumption (Nm3/min): (No load) 0.47, Head Height (mm): 47
Category Grinder > Angle Grinders
Sonic Air
NITTO KOHKI
4.50(2)
389.99 SGD
ADD TO CART
Accessories: Whetstone No.2 (phi17x32mm) 1 No.3 (phi19x20mm) 1 zipper pin 1 spanner 14mm 1 coupler 200-30SH 1, TRUSCO Part Number: 116-6336, Type: Air-operated die grinder, Overall Length (mm): 135.5, Weight (kg): 0.6, No Load Rotation Speed (min-1[r.p.m]): 27000, Air Consumption (m3/min): 0.4, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 6, Purpose: Only for a whetstone
Category Grinder > Micro Grinder
Angle grinder
TOKU PNEUMATIC
699.99 SGD
ADD TO CART
Overall Length (mm): 274, 274, 274, Weight (kg): 3.4, 3.4, 3.4, No Load Rotation Speed (min-1[r.p.m]): 6500, 6500, 6500, Air Consumption (m3/min): 0.8-1, 0.8-1, 0.8-1, Grinding Wheel Diameter (phi mm): 230, 230, 230, Grinding Wheel Thickness (mm): 6, 6, 6, Grinding Wheel Hole Diameter (phi mm): 22, 22, 22
Category Grinder > Angle Grinders
Air Micro Grinder
MonotaRO
88.99 SGD
ADD TO CART
Accessories: 1/4 coupler, Overall Length (mm): 136, Weight (g): 250, No Load Rotation Speed (min-1[r.p.m]): 56000, Air Consumption (L/min): 198, Working Pressure (MPa): 0.62, Air Outlet: 1/4, Collet Size (mm): 3, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Do not use for any other purpose than original.
Category Grinder > Micro Grinder
Angle grinder
Nippon Pneumatic Mfg
389.99 - 539.99 SGD
Working Pressure (MPa): 0.6, Purpose: For metal polishing etc., Caution: * Do not use cutting wheels.
Category Grinder > Angle Grinders
Angle grinder (super lightweight)
Nippon Pneumatic Mfg
5.00(1)
409.99 SGD
ADD TO CART
TRUSCO Part Number: 276-7597, Overall Length (mm): 192, Weight (kg): 1, No Load Rotation Speed (min-1[r.p.m]): 13600, Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.5, Hose Mounting Nozzle: Rc1/4, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Angle Grinders
Die grinder
SP AIR
249.99 SGD
ADD TO CART
TRUSCO Part Number: 238-8961, Overall Length (mm): 120, Weight (kg): 0.30, No Load Rotation Speed (min-1[r.p.m]): 28000, Chuck Bore (phi mm): 6, Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.2, Hose Mounting Nozzle: NPT1/4, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Straight Grinder
100phi Angle Grinder
YoshidaTools
369.99 SGD
ADD TO CART
Accessories: 32Hex box wrench, 6Hex hex wrench, 5Hex hex wrench, coupler plug NL-22PM, Overall Length (mm): 179, Weight (kg): 0.97, Maximum Peripheral Velocity (m/min): Wheels / 4300, Screw Dimensions: (Hose cap) RC1 / 4, Grinding Wheel Dimensions (mm): 100 x 2 to 6 x 15, Handle: Roll method, Rolling Speed of No-load (min-1[r.p.m]): 13000, Recommended Hose Diameter (mm): 9.5, Air Consumption (Nm3/min): (Maximum) 0.40, Head Height (mm): 57.5, Purpose: Finish of welding surface, groove drilling, rust removal, deburring, etc.
Category Grinder > Angle Grinders
Sticker Stripping Grinder
MASTER AIR
199.99 SGD
ADD TO CART
Specification: With gear type eraser pad, Overall Length (mm): 195, Weight (g): 470, Size: (Paddoneji) 5 / 16-24, Hole Diameter (phi mm): (Recommended air hose) 9.5, No Load Rotation Speed (min-1[r.p.m]): 3800, Air Consumption (m3/min): 0.41
Category Grinder > Straight Grinder
Disc grinder
YOKOTA INDUSTRIAL
389.99 SGD
ADD TO CART
TRUSCO Part Number: 176-9146, Overall Length (mm): 188, Weight (kg): 1.0, No Load Rotation Speed (min-1[r.p.m]): 13000, Air Pressure (MPa): 0.6, Hose Mouthpiece Mounting Screw: 1/4Rc, Use Hose Diameter (mm): 9.5, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Disc Grinder
Air Sonic
NITTO KOHKI
429.99 SGD
ADD TO CART
TRUSCO Part Number: 116-6352, Overall Length (mm): 135.5, Weight (kg): 0.6, No Load Rotation Speed (min-1[r.p.m]): 27000, Air Consumption (m3/min): 0.4, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 6, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Micro Grinder
Air Sonic
NITTO KOHKI
5.00(1)
529.99 SGD
ADD TO CART
TRUSCO Part Number: 116-6344, Overall Length (mm): 170.7, Weight (kg): 0.45, No Load Rotation Speed (min-1[r.p.m]): 37500, Air Consumption (m3/min): 0.35, Working Pressure (MPa [kgf/cm2]): 0.59[6], Chuck Diameter (mm phi): 6, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Grinder > Micro Grinder

1 2 3 4 5 6 7 8 9 10 ...11 Next