TRUSCO Part Number: 390-4288, Maximum Torque (N m): 470, No Load Rotation Speed (min-1[r.p.m]): 10000, Body Weight (kg): 1.2 (Except for socket and coupler), Square Drive (mm): 12.7 (With a pin hole), Air Consumption (L/min): 127.5 (Max.), Working Pressure (MPa): 0.62, Air Hose Inside Diameter (phi mm): 10, Body Dimensions (Width x Depth x Height) (mm): 166.5x60x170, Air Intake: PT1/4, Adaptive Bolt Size: M16, Purpose: For automobile tyre replacement. For general work bolt removal For bolt removal in construction work
Set Contents: Air impact wrench body / accent make one touch plug (PT1/4 male)-long light socket (17 / 19.21 mm)-Hand wrench seal, Overall Length (mm): 187 (Main body), Plug-in Angle (mm [inch]): 12.7(1/2), Maximum Torque (N m): 407, No Load Rotation Speed (min-1[r.p.m]): 6800, Air Consumption (L/min): 126, Body Weight (kg): 2.1, Hose Inside-Diameter (phi mm): More than 6.5, Air Outlet: PT male/PT / female 6.35 mm (1 / 4-inch), Operating Air Pressure (MPa[kgf/cm2]): 0.61(6.3), Caution: Use 0.61MPa(6.3kgf/cm2)or less air compression.Use in higher pressures will cause accidents or damage of the product.
Empty rotation with the socket still on will cause breakdown.
Pulling the trigger will create impact, hold firmly with both
Accessories: Bit (+) 2x65G, fittings BPN-2F, TRUSCO Part Number: 125-4375, Shape: Straight, Overall Length (mm): 187, Weight (kg): 0.83, Weight (g): 830, Capability: 4.0-5.0 (usually a screw) 3.5 to 4.0 (tapping screws) 2.7 to 3.5 (wood screws) 4.0 to 5.0 (volts), No Load Rotation Speed (min-1[r.p.m]): 9000, Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.2, Maximum Tightening Torque (N m): 10.3, Bit Plug Part (mm): 6.35, Hose Coupling: G1/4, 2014 TRUSCO Published Page: 2-1529, Purpose: Screw clamping of down direction. Work in assembly line.
Specification: Double hammer, TRUSCO Part Number: 336-6014, Overall Length (mm): 110, Weight (kg): 0.68, No Load Rotation Speed (min-1[r.p.m]): 17000, Working Pressure (MPa): 0.62, Air Consumption (m3/min): 0.4, Maximum Tightening Torque (N m): 7 - 68, Exhaust System: Handle, Socket Plug Insertion Angle (mm): 9.5, Ability Bolt Diameter (mm): 10, Hose Mounting Nozzle: NPT1/4, Purpose: Bolt removal work of general maintenance work, such as automobiles, airplanes miniature. Ideal for work in narrow and deep places
Set Contents: Air impact wrench body / accent make one touch plug (PT1/4 male)-long light socket (17 / 19.21 mm)-Hand wrench seal, Overall Length (mm): 180 (Main body), Plug-in Angle (mm [inch]): 12.7(1/2), Maximum Torque (N m): 542, No Load Rotation Speed (min-1[r.p.m]): 6800, Air Consumption (L/min): 128, Body Weight (kg): 2.19, Hose Inside-Diameter (phi mm): More than 6.5, Air Outlet: PT male/PT / female 6.35 mm (1 / 4-inch), Operating Air Pressure (MPa[kgf/cm2]): 0.61(6.3), Caution: Use 0.61MPa(6.3kgf/cm2)or less air compression.Use in higher pressures will cause accidents or damage of the product.
Empty rotation with the socket still on will cause breakdown.
Pulling the trigger will create impact, hold firmly with both
Weight (kg): 1.1, No Load Rotation Speed (min-1[r.p.m]): 2300, Body Dimensions (Length x Width x Height) (mm): 200x146x48, Air Consumption (L/min): 160, Maximum Working Pressure (MPa): 0.59, Drill Bit Size(mm): (Maximum diameter)10, Purpose: Drilling work on wood, steel, resin, etc
TRUSCO Part Number: 336-6022, Overall Length (mm): 120, Weight (kg): 0.68, No Load Rotation Speed (min-1[r.p.m]): 17000, Screw Fastening Capacity (mm): 5, Working Pressure (MPa): 0.62, Air Consumption (m3/min): 0.4, Maximum Tightening Torque (N m): 48, Chuck: Bit sleeve-type, Hose Mounting Nozzle: NPT1/4, Outlet: (Bit) 6.35mm, Exhaust Direction: Backward, 2014 TRUSCO Published Page: 2-1533, Purpose: Bolt removal work of general maintenance work, such as automobiles, airplanes miniature. For work in narrow and deep places, Caution: Tightening torque is approximate value. Torque value will vary with conditions.
Overall Length (mm): 210, Weight (kg): 1.1, Height (mm): 110, Number of Revolutions: 1600ipm, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
TRUSCO Part Number: 485-1013, Overall Length (mm): 166, Weight (kg): 0.5, No Load Rotation Speed (min-1[r.p.m]): 250, Working Pressure (MPa): 0.6-0.7, Air Consumption (m3/min): 0.32, Exhaust System: Rear, Socket Plug Insertion Angle (mm): 9.5, Ability Bolt Diameter (mm): 10, Hose Mounting Nozzle: PT1/4, Use Air Hose's Inner Diameter (mm): 6.5 or more, 2015 Trusco Published Pages: 2 1680, Purpose: Work at narrow places in which the work space is limited., Work at narrow places in which the work space is limited., Work at narrow places in which the work space is limited., Caution: Tightening torque is for reference only. The torque value changes depending on the conditions., Tightening torque is for reference only. The torque value changes depending on the conditions., Tightening torque is...
Weight (kg): 1.6, Revolution (min-1[r.p.m]): 10000, Maximum Torque (N m): 250, Screw Fastening Capacity (mm): M10, Air Consumption (L/min): 900, Working Pressure (MPa): 0.62, Bit Plug Part (mm): 6.35, Air Outlet: PT1/4, Use Air Hose's Inner Diameter (mm): 9.5, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
TRUSCO Part Number: 756-3221, Length (mm): 193, Weight (kg): 2.1, Maximum Torque (N m): 1220, No Load Rotation Speed (min-1[r.p.m]): 8500, Noise Level (dB(A)): 88.7, Outlet Corner (sq.): 1/2, Impact Cycle (time/min): 1220, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
TRUSCO Part Number: 398-5300, Overall Length (mm): 192, Weight (kg): 1, No Load Rotation Speed (min-1[r.p.m]): 7500, Air Consumption (m3/min): 0.38, Hose Coupling: Rc1/4, Operating Torque Range (N/m): 49-116.8, Ability Bolt Diameter (mm): 6-8, Use Air Hose's Inner Diameter (mm): 6.35, Purpose: By the oil lubricating effect, there is no idle due to inertia, it is also ideal for continuous tightening and loosening work. The continuous operation of the assembly line be asked to work efficiency., By the oil lubricating effect, there is no idle due to inertia, it is also ideal for continuous tightening and loosening work. The continuous operation of the assembly line be asked to work efficiency.