Hydraulic Equipment and Hydraulic Pressure Hose(High-Pressure Hose)

Minimum Bending Radius (mm): 30, Inside Diameter (inch): 3/16, Outer Diameter (mm): 10.4, Inner Diameter (mm): 4.8

Maximum Working Pressure (MPa): 20.0, Minimum Bending Radius (mm): 40, Name: 04, Inside Diameter (inch): 1/4, Outer Diameter (mm): 12.4, Inner Diameter (mm): 6.3

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5, Material (O-Rings): NBR, Minimum Burst Pressure (MPa): 82

Material (Body): Carbon steel, Material (Seal): NBR, Maximum Working Pressure (MPa): 20.5

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5, Material (O-Rings): NBR, Minimum Burst Pressure (MPa): 82

Minimum Bending Radius (mm): 60, Outer Diameter (mm): 16.1, Inner Diameter (mm): 9.5

Compatible: CF-06, CF-08, Rated Filtration (micrometer): 10

Minimum Bending Radius (mm): 80, Outer Diameter (mm): 19.9, Inner Diameter (mm): 12.7

Maximum Working Pressure (MPa): 10.5, Minimum Bending Radius (mm): 60, Name: 06, Inside Diameter (inch): 3/8, Outer Diameter (mm): 14.0, Inner Diameter (mm): 9.5

Caution: Sub-plate is not attached to the valve.

Material: SS-SC equivalent steel, Surface Processing: Zinc plating - chromate treated

Material (Body): Carbon steel, Material (Seal): NBR, Maximum Working Pressure (MPa): 20.5

Specification: Union female-screw type (with 30-degree sheet), Compatible: Adapter / 010, 045, 090, 150, 020, 025, 064, 069, 030, Material: Steel, Allowable Temperature (degreeC): -20 - 100

Purpose: For general hydraulic piping

Usage: Attach on upper part of a reservoir tank.

Material: Steel

Screw Diameter: G1/4, Maximum Working Pressure (MPa): 20.5, Minimum Bending Radius (mm): 70, Dimention X (mm): 19, Hose Inside-Diameter (phi mm): 6.3, Dimensions Y (mm): 17, Compatible Fluid: Mineral hydraulic oil, Reinforcing Layer: 1W, Fluid Temperature Range (Degree c): -40 to +100, Hose Outer Diameter (mm): 13.8, Recommended Ambient Temperature (degree C): -40 to +70, Metal Mouth Ring Length (L) (mm): 56

Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5

Operating Temperature Range (deg C): (Air)-40 to +100,(Water)0 to +50,(General hydraulic oil)-40 to +100, Maximum Working Pressure (MPa): 0.8(at20deg C), Negative Pressure Performance (kPa): -101.294

Peak Flow Rate (L/min): 100, Maximum Working Pressure (MPa): 35, Allowable Surface Pressure (MPa): (Tank side) 21, Manual Mode: Push pin with, Design: 70, Highest Switch Frequency (min-1): 300

Material: Iron

Screw Diameter: G3/8, Maximum Working Pressure (MPa): 20.5, Minimum Bending Radius (mm): 90, Dimention X (mm): 22, Hose Inside-Diameter (phi mm): 9.5, Dimensions Y (mm): 19, Reinforcing Layer: 2W, Metal Mouth Ring Length (L) (mm): 62, Purpose: For general hydraulic piping

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5

Material (Body): Special steel, Fluid: Hydraulic oil, Material (Seal): Nitrile rubber

Material (Body): Carbon steel, Material (ball): SUS316, Material (O-Rings): NBR, Material (ball seal): Duracon

Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Material: Steel

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5

Material: Iron, Plating: Trivalent Chromate, Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Weight (ｋg): 0.34, Maximum Working Pressure (MPa): 35

Screw Diameter: G3/8, Minimum Bending Radius (mm): 75, Dimention X (mm): 22, Hose Inside-Diameter (phi mm): 9.5, Dimensions Y (mm): 19, Reinforcing Layer: 1W, Fluid Temperature Range (Degree c): -40 to +100, Hose Outer Diameter (mm): 16.6, Recommended Ambient Temperature (degree C): -40 to +70, Metal Mouth Ring Length (L) (mm): 62, Purpose: For general hydraulic piping

Material: SS41 equivalent, Material (O-Rings): NBR, Plating: Trivalent Chromate

Material (O-Rings): NBR

Material (Body): Carbon steel, Material (ball): SUS316, Material (O-Rings): NBR, Material (ball seal): DURACON

Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Material (Body): Special steel, Socket or Plug: Plug, Material (Seal): Nitrile rubber

Caution: Connect tank piping directly to the tank without joins with other tank piping. In order to carry out the stable pressure control, loosen the air bleed screw, remove air carefully, and fill in valve with oil. Fully open the pressure adjustment handle f

Compatible: 32EA06C

Socket or Plug: Plug, Compatible Fluid: Hydraulic oil

Material: SS41 equivalent, Material (O-Rings): NBR, Plating: Trivalent chromate

Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Material: Iron

Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Material: Iron

Purpose: For general hydraulic piping, Caution: In cases where the hose is a straight line, the length up until the tip of the double ended fitting (coupling) is l. The length is not included during adapter assembly.

Dimensions L (mm): 65, Minimum Bending Radius (mm): 115, Dimensions C (mm): 10.5, Name: 9, Hose Inside-Diameter (phi mm): 9.5, Screw T: G3/8, Minimum Burst Pressure (MPa): 68.6, Reinforcing Layer: 1W, Maximum Dynamic Pressure (MPa): 20.5, Fluid Temperature Range (Degree c): -40 to +100, Available Atmosphere Temperature (degree c): -40 to +70, Hose Outer Diameter (mm): 17.5, Dimension HEX(mm): 22

Dimensions L (mm): 65, Maximum Working Pressure (MPa): 14.0, Minimum Bending Radius (mm): 115, Dimensions C (mm): 10.5, Name: 9, Hose Inside-Diameter (phi mm): 9.5, Dimensions I (mm): 31, Screw T: G3/8, Minimum Burst Pressure (MPa): 68.6, Reinforcing Layer: 1W, Maximum Dynamic Pressure (MPa): 20.5, Hose Outer Diameter (mm): 17.5, Mass (g/m): Hose/400, Dimension HEX(mm): 22, Screw Inner Caliber (mm): 7.0, Purpose: For general hydraulic piping, Caution: In cases where the hose is a straight line, the length up until the tip of the double ended fitting (coupling) is l. The length is not included during adapter assembly.

Dimensions L (mm): 70, Maximum Working Pressure (MPa): 20.5, Minimum Bending Radius (mm): 160, Dimensions C (mm): 11.5, Hose Inside-Diameter (phi mm): 12.7, Screw T: G1/2, Minimum Burst Pressure (MPa): 103, Reinforcing Layer: 2W, Maximum Dynamic Pressure (MPa): 30.9, Hose Outer Diameter (mm): 22.2, Dimension HEX(mm): 27, Purpose: For general hydraulic piping

Dimensions L (mm): 65, Maximum Working Pressure (MPa): 20.5, Minimum Bending Radius (mm): 130, Dimensions C (mm): 10.5, Name: 9, Hose Inside-Diameter (phi mm): 9.5, Dimensions I (mm): 31, Screw T: G3/8, Minimum Burst Pressure (MPa): 103, Reinforcing Layer: 2W, Maximum Dynamic Pressure (MPa): 30.9, Hose Outer Diameter (mm): 19.1, Mass (g/m): Hose/615, Dimension HEX(mm): 22, Screw Inner Caliber (mm): 7.0, Purpose: For general hydraulic piping, Caution: In cases where the hose is a straight line, the length up until the tip of the double ended fitting (coupling) is l. The length is not included during adapter assembly.

Material (O-Rings): NBR

Material: Iron

Socket or Plug: Socket, Maximum Working Pressure (MPa): 21, Maximum Pressure (MPa): 31.5, Purpose: Hydraulic pressure equipment, high pressure gas pipe

Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa [kgf/cm2]): 20.6(210), Pressure Resistance (MPa [kgf/cm2]): 31.0(316)

Material (Body): Special steel (nickel plated), Operating Temperature Range (deg C): -20 to +80, Valve Structure: Valve Yu, Socket or Plug: Plug, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 20.6, Pressure Resistance (MPa [kgf/cm2]): 31.0[316], Purpose: For high pressure, connectable type during residual pressure

Caution: In case not general hydraulic oil, packing O-ring and others will be changed., Maximum Working Pressure (MPa): 1, Filtration Pricision (Mesh): 150

Material: Iron

Material: Iron

Caution: Be sure to screw the screw type(JIS, PF, PT, metric screw threads, unified screw thread, NPT, etc.) and seat surface(male seat, female seat, packing seat, O-rings, etc.), because the adapter is just a coupling connecting the body and the cap of the hose.

Specification: Taper male screw type, Compatible: Adapter / 30,130, Material: Steel

Material: Steel

Material (Body): Steel, Operating Temperature Range (deg C): -30 to +100, Maximum Working Pressure (MPa): 20.5, Surface Processing: Zinc plated / chromate treatment , Material (O-Rings): NBR, Minimum Burst Pressure (MPa): 82