Accessories: (Only suction work)
Etching nozzle, brush nozzle, straight nozzle, nozzle extension pipe, dustbag, suction hose, fixing band x 2, Maximum Working Pressure (MPa): 3.0 (The maximum pressure that can be used continually), Body Weight (g): About 300, Caution: This product is high pressure only. Please pay attention about that the outlet is a high pressure coupler, the low-pressure coupler is not connected.
Accessories: PF1/4 both male screw nipple x 1 (nipple comes with a standard O ring.), TRUSCO Part Number: 292-4480, Material: Body: PP O-rings: Viton Valve guide: PP Packing: Viton Valves: PP Y gasket: Viton Flow control valve: PP, Weight (g): 90, Maximum Working Pressure (MPa): 1.47, Dimensions A (mm): 133.5, Dimensions B (mm): 128, Discharge Rate (L/min): 40-290(at 0.5Mpa), Normal Working Pressure (MPa): Less than 0.98, Operating Temperature (deg C): 0 - 50, Compatible Fluid: Air, Connection Port: Air suction mouth:G(PF) 1/4 female screw (JS-02 plug standard equipment) Nozzle: M14 P=1.0 male screw Minimum diameter of nozzle: phi3mm x 1 hole
Accessories: Fixing band (phi19 - 38mm) x2 lines, suction hose, dust bag, brush nozzle, extension pipe nozzle, straight nozzle, narrow mouth nozzle, Osukapura, Working Pressure (MPa): 0.4 to 0.6 (recommended), Maximum Working Pressure (MPa): 0.8, Body Weight (g): About 300, Air Consumption (L/min): About 70 (0.6MPa at the time), Discharged Air Volume (L/min): About 850 or more (0.4MPa at the time)
TRUSCO Part Number: 231-4754, Overall Length (mm): 237, Material (Body): Polyacetal, Weight (g): 110, Operating Temperature Range (deg C): -5 - 60, Maximum Working Pressure (MPa): 1.6, Nozzle Length (mm): 90, Fluid: Compressed air, Nozzle Diameter (phi mm): 3.5, Material (Nozzle): With a nickel plated brass, Nozzle Shape: Standard type, Air Intake: Rc1/4, Purpose: For air blower and blowing dust.
Application: Blowing off of cutting powder, dust, moisture and oil., Specification: Air inlet screw diameter: Rc 1/4 Air consumption quantity when measuring air pressure :0.94MPa, Caution: Nozzle cannot be replaced., Operating Temperature Range (deg C): 0-60 (32 to 140degreeF), Maximum Working Pressure (MPa): 0.97, Connection Method: Coupler connection, Air Consumption (L/min): 135, Fluid: Compressed air, Air Hose Inside Diameter (phi mm): 4 or more, Nozzle Diameter (phi mm): 2.1, Purpose: Remove, blow and dry dust. For Body Repair and Painting. Car maintenance. Mold. Metal Work.
Description: Since the plug is attached to the intake air of the body, can be installed in one-touch., Application: Blowing off of chips etc generated during machining, TRUSCO Part Number: 276-0231, Finishing Material: Aluminum, brass, nickel-plated (O-ring) NBR, Weight (g): 220, Maximum Working Pressure: 1, Nozzle Length (mm): 24, Nozzle Diameter (phi mm): 2, Nozzle Mounting Part: G1/8